Getting started
Baby unit installation options
The baby unit is ready for tabletop use. Use the provided wall mount if you want to mount it on a wall. Make sure to test the reception and the baby unit position before completing the wall mounting installation.
Tabletop to wall mount installation
Option 1: Use this method to fix the wall mount securely on the wall.
1.Place the wall mount on a wall and then use a pencil to mark the top two holes as shown. Then remove the wall mount and drill two holes in the wall (7/32” drill bit). Check for reception strength and camera angle before drilling the holes.
2.If you drill the holes into a stud, go to step 3.
If you drill the holes into an object other than a stud, insert the wall anchors into the holes and tap gently on the ends with a hammer until the wall anchors are flush with the wall.