Overhead Gym
Straps
Slots
Quilt
1Supports
•Place the quilt, print side up, on a flat surface.
•Fit the "T" end of each strap on the quilt through the slots in the supports. Pull up on the quilt to be sure it is secure.
Support
Straps
Tubes
Straps
2
•Locate both straps on the bottom of one of the tubes.
•Fit the ends of each strap into the support post.
•Turn the support over and fasten the straps.
•Repeat this procedure to attach the remaining tube ends to the supports.
3