Morphy Richards RN42288MUK manual Helpline, Maintenance, Features Your Steam Generator, Website

RN42288MUK Rev7:RN42288MUK Rev7 04/11/2009 10:28 Page 7

3Remove the tank from the base unit.

4Remove the anti-scale cartridge which is situated behind the tank, and replace the cartridge, making sure the replacement unit is pushed firmly in position.

5Re-position the tank.

6If the cartridge is not fitted correctly, the unit will not function. The ‘calc’ light å will flash, accompanied by a beep sound.

Re-fit the cartridge and the unit will operate as intended.

Note: A cartridge should filter 40 litres of hard water.

Replacement anti-scale refills

To obtain replacement anti- scale refills, telephone our spares number on:

0844 873 0719.

Vertical steam			HELPLINE
Hold the iron in a vertical			If you have any difficulty with
position between 1cm and 2cm			your appliance, do not hesitate
away from the item E. Press			to call us.
the steam trigger Ú, this will			We are more likely to be able to
create vertical steam.
			help than the store from where
This feature is especially useful			you bought it.
for removing creases from			Please have the following
hanging clothes, curtains, wall
hangings.			information ready to enable our
			staff to deal with your query
MAINTENANCE			quickly.
		• Name of the product
To clean a stainless steel
soleplate		• Model number as shown on the
To keep the soleplate of your			underside of the appliance.
iron clean and free of limescale,		• Serial number as shown on
we recommend that you use			underside of the appliance.
one of the gentle chrome, silver			UK Helpline
or stainless steel cleaners that
are generally available. Always	0844 871 0953
follow the manufacturer’s			Replacement Parts
instructions. To clean off melted
man-made fibres, set the iron	0844 873 0719
at 3-dot position and pass it			Ireland Helpline
over a clean piece of cotton
which will draw the deposit off	1800 409 119
the surface.

•If a new re-fill is not available, you may continue operating the appliance, but scale will build up in the system. Replace the anti-scale refill as soon as possible.

Part Number 01030.

FEATURES OF

YOUR STEAM

GENERATOR

To clean a coated soleplate

In the unlikely event of any man-made fibre fusing to the soleplate, set the iron at the

3-dot position and pass it over a clean piece of cotton, this will draw the deposit off the surface.

Do not use scouring powder or solution, as this could cause damage to the coating.

WEBSITE

You may also contact us through our website, or visit the site to browse and purchase appliances, spare parts and accessories from the extensive Morphy Richards range.

Steam function

During the steaming process, small amounts of water may be ejected from the soleplate. This is normal and can be avoided by using the steam for short amounts of time and only when the iron is at the correct temperature (the indicator light on the iron goes out when ready).

Sudden jolts of the boiler unit can also cause water droplets on the soleplate; therefore, do not move the base unit during ironing. We recommend for the first time ironing that you iron over an old towel.

To clean the exterior

Allow the steam generator to cool and wipe over with a

damp cloth and mild detergent,E then wipe with a dry cloth.

For details of other Morphy Richards products, please see our website: 7