2. Fit the end of the belt through the slot on the back of each slider.
1. Use the tip of the Color Me Gemz™ pen to color the facets on a gem slider or buckle. For best results, only color the faceted areas on each gem.
3. Wrap the belt around your waist. Fit the end of the belt through the slot in the buckle base. Lower the top of the buckle to fasten the belt in place.
4. Fit the pegs on the back of a buckle into the wider end of each slot in the buckle base.
5. Turn the buckle to lock in place! If you’d like to remove the buckle, simply turn and lift the buckle from the base.
6. When fi nished, be sure to replace the cap on each Color Me Gemz™ pen.