e
Instructions
Seal
Seal
Groove
Groove
3 | 4 |
•Look inside the groove surrounding the battery compartment.
•If your product DOES NOT have a seal, you must install one. Please follow steps 4 and 5.
•If a seal is already in this groove, your product DOES NOT require repair. Please throw away the enclosed seal. Replace the battery compart- ment door and tighten the screws. Do not
5
•Using a flathead screwdriver, carefully push the seal completely into the groove in the battery compartment.
•Replace the battery compartment door and tighten the screws. Do not
Installation is complete.
•Fit the seal into the groove surrounding the battery compartment, as shown in the illustration.
Note: Always remove exhausted batteries from any product. Exhausted batteries can leak fluids that can cause a chemical burn or injury.
If you have further questions regarding installation, please call
Mattel Canada Inc.
6155 Freemont Blvd.
Mississauga, Ontario L5R 3W2