Profiles, Call Settings | AT&T Z432 specification

home screen only. For example, you could assign right on the 4-Way Navigation Key to start the Calculator.

•Auto Keypad Lock: Configure your phone to lock the keypad when it is not in use. You can select the time delay from the available choices. If you select Off, the phone will not lock the keypad automatically.

•Main Menu Style: Set the main menu to be displayed as a list or a grid.

•Default Storage Location: Assign either the phone or the memory card as the location where the phone will save downloaded files.

•TTY Setting: Toggle TTY functionality. Please refer to “TTY Mode” under Accessibility in this manual for more information about this feature.

•T-coil Setting: Enables you to hear the phone’s audio through a hearing aid with a telecoil. Please refer to “HAC Mode” under Accessibility in this manual for more information about this feature.

•Phone Info: View technical information about your phone, including My Device Number, Version Info, Icon Glossary, and Operating System.

Profiles

A profile is a set of configurations appropriate to a specific environment. Each profile allows you to set the ringtone volume/vibration, the earpiece volume, and the warning tone.

From the home screen, select Main MenuSettingsProfiles. Select a profile and press the Left Soft Key to edit that profile.

•Voice Call Ringtone: Set the voice call ringtone.

•Ringtone Volume: Set the volume of the ringtone.

Settings

•Alert Type: Set the ring type (e.g. vibrate, ring, vibrate and ring, and ascending ringtone).

•Receiver Volume: Set the volume of the receiver.

•Message Tone: Set the notification ringtone for an incoming SMS or MMS message.

•Key Tone: Enable or disable keypad tones when dialing.

•Warning Tone: Turn the warning tone on or off.

•Power On/Off Tone: Turn on/off the sound that plays while powering on/off the phone.

•Missed Calls Alert: Enable, disable, and set timing for the missed calls audible notification.

Call Settings

From the home screen, select Main MenuSettingsCall Settings.

Earphone Auto Answer: You can configure the phone to answer incoming calls automatically when an earphone is connected to the phone.

Any Key to Mute: This option allows you to silence the ringtone by pressing any key when there is an incoming call.

Connection Reminder: When a call connects, you will hear a three-tone beep to notify you that the connection was successful.

Minute Reminder: When this setting is enabled, you will hear a short beep every minute while a call is in progress. You will hear the first beep after 50 seconds, then 1 minute 50 seconds, etc.

Send My Caller ID: This function allows you to prevent others from seeing your phone number when making outbound calls.

Settings