Blaupunkt CD127 manual Electrical Connections and Installation, General Recommendations

Page 6

Electrical Connections and Installation

@/<?#&*>@! To avoid the aggravation of costly mistakes and serious damage that could make you feel this way, please carefully read all of the instructions before you begin. Carefully follow all instructions. You’ll be glad you did!

GENERAL RECOMMENDATIONS

If you’re not confident that you can install the unit correctly, have it installed by a qualified Blaupunkt installation technician.

Use this unit only with negative ground 12 Volt (11-16 Volt) direct current (DC).

Be sure to detach the faceplate before you start to connect or install the unit.

Don’t assume that a seemingly matching wire harness in the vehicle has leads that match the leads of the unit’s wire harness.

We recommend making and testing all electrical connections before installing the unit. Connect the leads (wires) according to instructions and diagram below.

ELECTRICAL CONNECTION INSTRUCTIONS

1.Disconnect the vehicle battery’s negative terminal before making connections.

2.Connect the speakers and/or external amplifiers (if you have any) following the guidelines in the SPEAKER CONNECTION section below.

3.Connect the blue (trigger output) lead to the amplifier’s trigger input terminal and/or antenna motor trigger input terminal (if you have either or both of these items). The combined total amperage required for triggering the antenna motor and/or amplifier must not exceed 300 mA. DO NOT connect the blue lead to the antenna’s and/or amplifier’s power supply input.

4.Connect the black (power ground) lead to a grounded metal part on the vehicle. We recommend grounding all audio system black ground leads (head unit, external amplifier, etc.) to a common grounding point, preferably a non-painted surface under the instrument panel.

5.Connect the yellow (constant power) input lead to a source of constant battery power, preferably a terminal to an appropriate slot in the fuse box.

6.Connect the red (turn-on power) input lead only after the other leads are connected. Be sure to connect the red lead to a positive (+) 12 Volt power terminal that is energized only when the ignition key is set to the on position or accessory position.

7.Cover the ends of any unused leads with electrical tape. This will prevent them from touching the vehicle or each other and causing a short-circuit and damage to the radio or vehicle.

8.Reconnect the vehicle’s battery.

9.Verify that no fuses have blown.

10.Plug the harness into the unit.

11.Attach the faceplate and test the unit.

Once the connections have been successfully made, you can begin to mount the unit.

SPEAKER CONNECTIONS

The unit’s Dual-Level Fader allows you to fade between the front and the rear channels using either the front and/or rear speaker leads and/or the rear preamp outputs, providing you tremendous flexibility in configuring your speaker arrangement:

You can connect a speaker (regular, co-axial or tri-axial speakers or component speaker system, all hereafter referred to simply as “speaker”) to each of the units’ four pairs of speaker leads.

You can connect the 2 RCA preamp outputs to multiple external amplifiers and power multiple speakers or speaker systems through the amplifiers. (Blaupunkt amplifiers and speakers

available

separately). To add front preamp output,

purchase Blaupunkt part 8634494218 which is included

in the CDC-A05 and CDC-A071

changer’s harnesses. (See page 11)

 

 

• You can use either or both of these two methods.

 

 

Connecting the Speaker Leads

To prevent short circuits or serious damage to the unit and/or speakers:

Connect the speaker leads only as indicated in the wiring diagram. Disconnect the vehicle battery’s negative terminal before making connections.

6

Image 6
Contents Page FCC Warning Owner’s RecordTable of Contents Features Traffic Safety and PrecautionsDetachable Face Electrical Connections and Installation General RecommendationsAntenna Motor Switch Trigger Switch Mounting Hardware InstallationRecommendations Mounting The Unit in Most DashboardsMounting the Unit in a Japanese Car Maintenance Fuse ReplacementRemoving the Unit Specifications Audio Power SpecificationsOther Specifications See Traffic Safety & Precautions on Location of ControlsInstructions General Operation Audio Operation Radio Operation Compact Disc Play Operation Troubleshooting Guide Auxiliary Input JackCopyright 1997 by the Robert Bosch Corporation

CD127 specifications

The Blaupunkt CD127 is a compact and versatile car stereo that exemplifies a blend of modern technology and user-friendly design. Specifically crafted for drivers seeking an upgrade from basic factory audio systems, the CD127 provides impressive sound quality, advanced features, and a sleek aesthetic.

One of the standout characteristics of the Blaupunkt CD127 is its ability to play various media formats. This unit supports traditional CD playback, along with multiple digital formats, offering flexibility for music enthusiasts. With the inclusion of an FM/AM tuner, users can easily access their favorite radio stations, providing endless entertainment options on the road.

The Blaupunkt CD127 features an auxiliary input jack, enabling easy connectivity with external devices such as smartphones, tablets, or MP3 players. This fosters seamless integration, allowing users to bring their music library into the car. Additionally, the unit boasts a USB port, facilitating direct playback from flash drives and allowing for charging of devices simultaneously, further enhancing convenience.

Sound quality is a crucial aspect of any car audio system, and the CD127 does not disappoint. It offers a built-in power amplifier that delivers robust sound output, accompanied by adjustable equalizer settings. Users can tailor their listening experience with different sound profiles, ensuring a personalized and immersive audio environment. The clear display screen enhances usability, providing easy access to track information and system settings.

Durability and design are also key features of the Blaupunkt CD127. The unit is built to withstand the rigors of daily use, while its modern aesthetic can seamlessly integrate into various vehicle interiors. With a user-friendly interface, including simplified controls and easy-to-navigate menus, drivers can operate the stereo without distraction.

Furthermore, the Blaupunkt CD127 has been crafted with a focus on energy efficiency, ensuring that it does not drain the vehicle's battery. This is an essential feature for frequent travelers, as it contributes to the longevity and reliability of the car's electrical system.

In summary, the Blaupunkt CD127 emerges as a formidable choice for those looking to enhance their in-car audio experience. With its diverse media compatibility, user-friendly controls, and quality sound output, the CD127 brings both convenience and pleasure to any journey. Whether commuting to work or embarking on a road trip, this car stereo elevates the driving experience by seamlessly merging functionality with style.