Instructions, Battery Notice | VTech 91-002898-000 US manual

INSTRUCTIONS

BATTERY INSTALLATION

1.Make sure the unit is turned OFF.

2.Locate the battery cover on the back

of the unit. Use a screwdriver to loosen the screw.

3. Install 2 new ‘AA’ (AM-3/LR6) batteries following the diagram inside the battery box. (The use of new alkaline batteries is recommended for maximum performance.)

4.Replace the battery cover and tighten the screw to secure the battery cover.

BATTERY NOTICE

•Use only batteries of the same or equivalent type as recommended.

•Do not mix different types of batteries: alkaline, standard (carbon- zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.

•Do not use damaged batteries.

•Insert batteries with the correct polarity.

•Do not short-circuit the battery terminals.

•Remove exhausted batteries from the toy.

•Remove batteries during long periods of non-use.

•Do not dispose of batteries in fire.

•Do not charge non-rechargeable batteries.

•Remove rechargeable batteries from the toy before charging (if removable).