Soundstream Technologies Wireless Subwoofer Volume Control System

INSTALLATION

1.Disconnect all power wires from the amplifier.

2.Remove the bottom cover plate of the amplifier by removing the four screws at the ends of the amplifier. (There also may be screws on the center of the bottom plate on the larger Reference amplifiers.) A Torx® T -15 driver will be needed to remove the screws.

3.With a Philips screw driver, bolt the AIRBASS receiver board to the four stand-offs on the bottom plate of the amplifier using the four screws provided.

4.Plug the ribbon cable to the receiver board and to the amplifier main pc board connector. The connector will only go on one way.

5.On the amplifier main pc board near the ribbon connector, there is a switch labeled "AIRBASS". Move this switch to the "IN" position.

6.Route the antenna wire through one of the holes in the bottom plate.

7.Re-attach the bottom cover to the amplifier.

8.Once in the car, mount the amplifier and route the antenna wire. For the best range, place the end of the antenna as high up in the vehicle as possible.

9.For multiple receiver boards on multiple amplifiers, route the antennas as far from each other as possible. This will give the best range of operation.

10.Please read your amplifier owner's manual to see howAIRBASS

BASIC OPERATION

The AIRBASS receiver board comes from the factory pre-programmed to be used with the transmitter it has been packaged with. The AIRBASS accessory is operated simply by momentarily depressing any of the four buttons on the top of the remote controller. For initial transmitter set-up, please refer to the diagram below and follow these steps:

1.Turn on the amplifier.

2.The AIRBASS accessory comes from the factory programmed to start in the "maximum" setting (i.e., +24 dB). While in this state, set the level of the amplifier by adjusting the gain controls on the front of the amplifier. This level should be the loudest the amplifier is ever played.

3.Momentarily press the ê button to decrease the output level. The LED on the transmitter will light RED for about a second. This will decrease the level ONE STEP. Wait for the LED to go out before sending another command.

4.Momentarily press the é button to increase the output level.

5.Momentarily press the "X" button to MUTE the output of the

Wireless Subwoofer Volume Control System specifications

Soundstream Technologies has made significant strides in enhancing automotive audio systems with its innovative Wireless Subwoofer Volume Control System. This advanced system is designed to provide an effortless and dynamic way to manage subwoofer output, allowing users to fine-tune their audio experience while driving.

One of the main features of the Soundstream Wireless Subwoofer Volume Control System is its intuitive wireless operation. Users no longer need to deal with complicated wiring or manual adjustments. The system operates using a remote control that allows for easy volume adjustments from anywhere in the vehicle. This feature is beneficial during travel as it enables drivers and passengers to personalize their sound experience without distractions.

The Wireless Subwoofer Volume Control System also employs cutting-edge digital signal processing (DSP) technology. This ensures that sound quality remains pristine, delivering rich bass tones without distortion. By utilizing DSP, users can enjoy enhanced audio clarity, enabling them to hear their favorite music exactly as the artists intended.

Another notable characteristic of this system is its compatibility with a wide range of subwoofers, making it a versatile addition to any car audio setup. Whether you have a single subwoofer or a complex multi-subwoofer arrangement, Soundstream's technology allows for seamless integration, providing flexibility in crafting the perfect sound environment.

The design of the volume control unit is sleek and modern, complementing the aesthetics of contemporary car interiors. It features a simple interface with clearly labeled controls, ensuring that users can make quick adjustments without confusion. Additionally, the compact design allows it to fit discreetly within any vehicle layout.

Durability is also a key consideration in the design of the Soundstream Wireless Subwoofer Volume Control System. Constructed from high-quality materials, it can withstand the rigors of daily use while preserving functionality. Moreover, the system is designed to work effectively in various temperatures and operating conditions, ensuring long-term reliability.

In summary, the Soundstream Technologies Wireless Subwoofer Volume Control System stands out in the automotive audio landscape with its wireless functionality, DSP technology, versatile compatibility, sleek design, and durability. This innovative solution provides users with an unparalleled audio experience, allowing them to enjoy rich, powerful bass while maintaining convenience and ease of use.