Assembly
Seat Back
Peg
Holes
13
•At an angle, fit the pegs on each side of the seat back into the holes in the sides of the seat bottom.
Hint: You may need to flex the bottom edge of the seat back to fit the seat back pegs into the holes in the seat bottom.
M4 x 17mm
Screws
15
• Insert two M4 x 17mm screws into the seat back and tighten.
Seat Bracket
M4 x 17mm
Screws
14 | BACK VIEW |
• Lift the seat back latch and push the seat back forward.
16
•Fit a seat bracket to the side of the seat bottom, as shown.
•Insert two M4 x 17 mm screws and tighten.
7