| Assembly |
| Lower Post |
4 | Base |
|
• While holding the ring assembly and rim together, |
|
turn them over. |
|
• Insert four #6 x 1/2"" screws into the holes in the rim, making | 5 |
sure each hole in the rim is still aligned with each screw hole | |
in the net assembly. |
• Partially tighten the screws. Turn the rim over to ensure that
the net loops are still in the grooves and through the ring • Insert and "snap" the lower post into the base. tabs. Now, tighten the screws.
4