Battery Battery Safety Replacement Information

Battery	Battery Safety
Replacement	Information

For best performance, we recommend replacing the batteries that came with this toy with three, new alkaline “AA” (LR6) batteries.

•Locate the battery compartment on the bottom of the toy.

•Loosen the screws in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door.

•Remove the exhausted batteries and throw them away.

•Insert three “AA” (LR6) alkaline batteries.

Hint: We recommend using alkaline batteries for longer battery life.

•Replace the battery compartment door and tighten the screws with a Phillips screwdriver.

•If this toy begins to operate erratically you may need to reset the electronics. Slide the power/mode switch off and then back on.

•When sounds or lights from this toy become faint or stop, it’s time for an adult to change the batteries.

•Protect the environment by not disposing of this product with household waste (2002/96/EC). Check your local

authority for recycling advice and facilities (Europe only).

1.5V x 3

“AA” (LR6)

In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:

•Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).

•Insert batteries as indicated inside the battery compartment.

•Remove batteries during long periods of non- use. Always remove exhausted batteries from the product. Dispose of batteries safely. Do not dispose of this product in a fire. The batteries inside may explode or leak.

•Never short-circuit the battery terminals.

•Use only batteries of the same or equivalent type, as recommended.

•Do not charge non-rechargeable batteries.

•Remove rechargeable batteries from the product before charging.

•If removable, rechargeable batteries are used, they are only to be charged under adult supervision.