Assembled Parts
CAUTION
This package contains small parts.
For adult assembly only.
Oven Front | Oven Back | Oven Door |
4 Feet | Cover |
Assembly
Feet
1
•Fit the slot on a foot onto the tab on another foot. Repeat to connect the other two feet to form a base.
4 Screws
2
Outer Column - 2 Pieces | Inner Column - 2 Pieces |
•Carefully turn the base assembly over. Insert four screws into the base and tighten.
•Set the base assembly aside for assembly step 5.
Inner Column Pieces
Tabletop - 2 Pieces
#6 x ¾" (1,9 cm) Screw – 24
Shown Actual Size
Tighten and loosen all screws with a Phillips screwdriver.
Do not
Push near | Push near |
each tab | each tab |
(on other side) |
|
3
•Fit the inner columns together, by inserting the tabs into the slots on each piece.
•Push to “snap” each tab in place.
3