Battery Replacement and Power Switch

For best performance, we recommend replacing the batteries that came with this toy with two, new “AAA” (LR03) alkaline batteries.

•Open the fasteners on the back of the doll.

•Remove the sound box from inside the doll.

•Loosen the screws in the sound box battery compartment door with a Phillips screwdriver. Remove the door.

•Remove the exhausted batteries and dispose of them properly.

•Insert two, new “AAA” (LR03) alkaline batteries.

Hint: We recommend alkaline batteries for longer battery life.

•Replace the battery compartment door and tighten the screws. Do not over-tighten.

•Fit the sound box back inside the doll. Make sure the button on the sound box is facing the front of the doll.

•If this toy begins to operate erratically, you may need to reset the electronics. Slide the power switch off and then back on.

•When sounds from this toy become faint or stop, it’s time for an adult to change the batteries.

•Slide the power switch to ON .

•Replace the sound box in the doll and close the fasteners.

Hint: Make sure the button on the sound box is facing the front of the doll.

•When you are finished playing with this toy, slide the power switch OFF .