Battery Replacement

1.5V x 2

“AA” (LR6)

For best performance, we recommend replacing the batteries that came with this toy with two, new alkaline “AA” (LR6) batteries.

•Locate the battery compartment door on the underside of the toy.

•Loosen the screw in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door.

•Insert two "AA" (LR6) alkaline batteries.

Hint: We recommend using alkaline batteries for longer battery life.

•Replace the battery compartment door and tighten the screw with a Phillips screwdriver. Do not over-tighten.

•When sounds from this toy become faint or stop, it’s time for an adult to change the batteries!

Battery Safety Information

In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:

•Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).

•Insert batteries as indicated inside the battery compartment.

•Remove batteries during long periods of non-use. Always remove exhausted batteries from the product. Dispose of batteries safely. Do not dispose of this product in a fire. The batteries inside may explode or leak.

•Never short-circuit the battery terminals.

•Use only batteries of the same or equivalent type, as recommended.

•Do not charge non-rechargeable batteries.

•Remove rechargeable batteries from the product before charging.

•If removable, rechargeable batteries are used, they are only to be charged under adult supervision.