Altinex MT115-111 manual Ver, Clr, Test, Help, Fbd, Gain=, Rsi, Rsn, Rmc, Rmg

MULTITASKER

24.[RMG]

This command deletes one or all groups.

Command Format: [RMGk]

Gk = Group ID (k = # from 1-8, * for all)

Example:

Remove all cards from G52 by sending [RMG5]. The system will return the following feedback:

[G5=0]

Example 2:

Remove all cards from all groups, effectively deleting all groups, by sending [RMG*]. The system will return the following feedback:

G1-G8: EMPTY

25.[RD]

This command reads and then displays the members in a group.

Command Format: [RDGk]

Gk = Group ID (k = # from 1-8)

Example:

C2, C4, and C6 make up G5. Read the member data for G5 by sending the command [RDG5]. The system will return feedback as follows:

[G5=C2C4C6]

The feedback shows G5 and then the cards that make up G5. In this case, G5 includes C2, C4, and C6.

7.3SUMMARY OF COMMANDS Basic Commands

1)	[VER]	Display firmware version
2)	[C]	Display card status
3)	[CnS]	Save card settings
4)	[..S]	Save current setting
5)	[CLR]	Reset card to defaults
6)	[TEST]	Test internal memory ICs
7)	[HELP]	Display available commands
Feedback Commands
8)	[FBD]	Feedback delay on/off
9)	[?]	Display system cards
10)	[?C]	Display card information
11)	[STA1]	Auto-feedback on
12)	[STA0]	Auto-feedback off
Card Commands
13)	[EQ]	Select equalization adjustment
14)	[EQ=]	Set equalization level
15)	[GAIN]	Select video gain adjustment
16)	[GAIN=]	Set video gain level
ID Commands
17)	[RSI]	Reset Card IDs to defaults
18)	[SIDn]	Set all Card IDs
19)	[SIDnCi]	Set one Card ID
20)	[SID+]	Set all Card IDs to an offset
21)	[RSN]	Display card slot number
Group Commands
22)	[WR]	Add card(s) to a group
23)	[RMC]	Remove card(s) from group
24)	[RMG]	Delete group
25)	[RD]	Display group members

400-0443-004 16