Assembly
CAUTION
This product contains small parts.
For assembly by an adult. Take extra care
during unpacking and assembly.
Chutes
Base
1
•Position the base
•Fit the two chutes into the openings in the base, as shown.
•Insert two screws into each chute and tighten.
Supports
2
•Fit the two supports into the openings in the base, as shown.
•Insert two screws into each support and tighten.
Foot
3
•Fit the foot onto the two supports.
•Insert four screws into the foot and tighten.
•Set the assembly upright.
Press
Press
4
•Press and hold the two buttons on the hubs. Then lift the arch until it “clicks” in place.
3