Fisher-Price K7164 Assembly, Before Use, FCC Statement, Battery Safety Information, Care

Page 2

Assembly

Battery Replacement

Handle

“Snap” the handle into the top of the vacuum.

Before Use

CAUTION

Please keep small parts such as the plastic tab out of children’s reach. Throw the plastic tab away.

Note: A plastic tab is attached to the toy for in-store demonstration purposes. While the tab may have already been removed, check the toy to be sure. If the plastic tab is still attached, pull and remove the tab. Throw the plastic tab away.

FCC Statement

(United States Only)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Consult the dealer or an experienced radio/TV technician for help. Note: Changes or modifications not expressly approved by the manu- facturer responsible for compliance could void the user’s authority to operate the equipment.

For best performance, we recommend replacing the batteries that came with this toy with three, new “AA” (LR6) alkaline batteries.

Loosen the screws in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door.

Insert three “AA” (LR6) alkaline batteries.

Hint: We recommend using alkaline batteries for longer battery life.

Replace the battery compartment door and tighten the screws with a Phillips screwdriver. Do not over-tighten.

When sounds or lights from this toy become faint or stop, it’s time for an adult to change the batteries!

Protect the environment by not disposing of this product with household waste (2002/96/EC). Check your local

authority for recycling advice and facilities (Europe only).

Battery Safety Information

1.5V x 3

“AA” (LR6)

In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:

Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).

Insert batteries as indicated inside the battery compartment.

Remove batteries during long periods of non-use. Always remove exhausted batteries from the product. Dispose of batteries safely. Do not dispose of this product in a fire. The batteries inside may explode or leak.

Never short-circuit the battery terminals.

Use only batteries of the same or equivalent type, as recommended.

Do not charge non-rechargeable batteries.

Remove rechargeable batteries from the product before charging.

If removable, rechargeable batteries are used, they are only to be charged under adult supervision.

Care

Wipe this toy with a clean cloth dampened with a mild soap and water solution. Do not immerse this toy.

This toy has no consumer serviceable parts. Do not take this toy apart.

Image 2
Contents Learning Vacuum Before Use AssemblyBattery Safety Information FCC StatementLearning Mode Tidy Up with Music and FunConsumer Information Learn every day through fun, familiar play