Battery | Battery Safety |
Replacement | Information |
1,5V x 3
“AA” (LR6)
For best performance, we recommend replacing the batteries that came with this toy with three, new “AA” (LR6) alkaline batteries.
•Locate the battery compartment on the back of the toy.
•Loosen the screws in the battery compartment door and remove the door.
•Remove the exhausted batteries and throw them away.
•Insert three, new “AA” (LR6) alkaline batteries.
Hint: We recommend alkaline batteries for longer battery life.
•Replace the battery compartment door and tighten the screws.
•If this product begins to operate erratically, you may need to reset the electronics. Slide the power/mode switch off then back on.
•When sounds and lights from this toy become faint or stop, it’s time for an adult to change the batteries.
• Protect the environment by not |
|
disposing of this product with |
|
household waste (2002/96/EC). |
|
Check your local authority for |
|
recycling advice and facilities |
|
(Europe only). | 4 |
|
In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:
•Do not mix old and new batteries or batteries of different types: alkaline, standard
•Insert batteries as indicated inside the battery compartment.
•Remove batteries during long periods of
•Never
•Use only batteries of the same or equivalent type, as recommended.
•Do not charge
•Remove rechargeable batteries from the product before charging.
•If removable, rechargeable batteries are used, they are only to be charged under adult supervision.