Assembled Parts
Backboard
BracketPost
Base
2 Feet
#6 x 1,6 cm Screw – 6
Tighten and loosen all screws with a Phillips screwdriver.
Do not
Assembly
CAUTION
This product contains small parts in its unassembled state. Adult assembly is required.
2 Feet
1 | Base |
•Fit the feet onto the base, as shown. Hint: The feet are designed to fit onto the base one way. If they do not seem to fit, turn them around and try again!
2BOTTOM VIEW
•Turn the base assembly over and insert six screws into the holes in the base. Tighten the screws.
2