Fisher-Price 79667 Assembly, Insert the new screw, Into the smaller hole, Motorized frame tube

Assembly

Button Button

	Feet	Feet
5	L	R

•Stand the assembly upright.

•Pull the legs out so that the buttons “snap” into the holes in the motorized frame.

•When standing behind the product, all four feet should be flat upon the floor. And, check for an L marking on the left foot and an R marking on the right foot.

•If the feet are not flat upon the floor, or the left and right feet have been reversed, remove both lower legs from the upper legs. Replace them onto the opposite upper leg.

Motorized

Frame Tube

Hole

Press Button

6

7	M5 x 30mm Screw
	Rounded
	Side
• Insert the new screw	M5 Lock Nut
	BOTH SHOWN ACTUAL SIZE
into the smaller hole in
the motorized frame tube.

Hint: You may need to tap the screw with a hammer or twist the screw to completely insert it through the hole.

•Attach the lock nut, rounded side facing out, to the screw.

•Tighten the screw with a Phillips screwdriver.

•Press the button on the seat tube and slide the seat tube into the motorized frame tube. Make sure the button on the seat tube “snaps” into the larger hole in the motorized frame tube.

Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.

©2004 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.

PRINTED IN CHINA 79667a-0922