Ready for Takeoff! 
1 |
Press to “snap” the plane to the arm.
Hint: Additional GeoTrax™ planes also work with the airport (sold separately and subject to availability).
3 |
2 |
On/Off Switch
•Locate the On/Off switch on the bottom of the tower base.
•Slide the switch to the 
position to turn the toy on and to the 
position to turn it off.
4 |
If you haven’t used the toy for a few minutes it goes to sleep. To “wake up” the control tower, press the reset button near the bottom of the tower.
Rotate the luggage carousel to get cargo | Use the crane to pick up and load cargo. |
from the train to the plane. |
|
Turn the selector dial to choose the sounds of a jet, a propeller plane or a helicopter.
•Pull back on the controller handle to raise the air-
plane with realistic sound effects and flashing lights. The more you pull back, the higher the plane flies.
•Push the handle forward to lower and land the plane.
The crane, windsock and sign have a small tab that fits into a matching notch in the runway, the tower base or any track piece.
PRESS
PRESS
For storage, press the buttons on the sides of the controller base and pull to remove.