Battery Replacement

For best performance, we recommend replacing the batteries that came with this toy with three, new alkaline “AA” (LR6) batteries.

Battery

Compartment

Door

Bottom View

•Locate the battery compartment door on the bottom of the toy.

•Loosen the screw in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door.

•Insert three “AA” (LR6) alkaline batteries.

•Remove the exhaused batteries and throw them away.

Hint: We recommend using alkaline batteries for longer life.

•Replace the battery compartment door and tighten the screw with a Phillips screwdriver. Do not over-tighten.

•When sounds from this toy become faint or stop, it’s time for an adult to change the batteries!

1.5V x 3

“AA” (LR6)

Shown Actual Size

Battery Safety Information

Batteries may leak fluids that can cause a chemical burn injury or ruin your toy. To avoid battery leakage:

•Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or recharge- able (nickel-cadmium).

•Insert batteries as indicated inside the battery compartment.

•Remove batteries during long periods of non-use. Always remove exhausted batteries from the toy. Dispose of batteries safely. Do not dispose of batteries in a fire. The batteries may explode or leak.

•Never short-circuit the battery terminals.

•Use only batteries of the same or equivalent type, as recommended.

•Do not charge non-rechargeable batteries.

•Remove rechargeable batteries from the toy before charging.

•If removable, rechargeable batteries are used, they are only to be charged under adult supervision.