Samsung 5050, 4050, 5070, 4000, 5000 user manual Sound Menu, Setup Menu

Sound Menu

Mode t

■■Standard: Selects the normal sound mode.

■■Music: Emphasizes music over voices.

■■Movie: Provides the best sound for movies.

■■Clear Voice: Emphasizes voices over other sounds.

■■Amplify: Increase the intensity of high-frequency sounds to allow a better listening experience for the hearing impaired.

Equalizer

(standard sound mode only)

■■Balance L/R: Adjusts the balance between the right and left speaker.

■■100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies.

■■Reset: Resets the equalizer to its default settings.

SRS TruSurround HD

(standard sound mode only)

SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.

■■Audio Delay: Lets you correct timing mismatches between the audio track and the video when you are watching the TV and listening to digital audio output from the TV through an external device such as an AV receiver. When you select Audio Delay, a slider appears. Use the left and right arrow buttons to adjust the slider. Press ENTERE when done (0ms ~ 250ms).

Speaker Select

■■Speaker Select (External Speaker / TV Speaker): If you are listening to the sound track of a broadcast or movie through an external receiver, you may hear a sound echo caused by the difference in decoding speed between the TV’s speakers and the speakers attached to your audio receiver. If this occurs, set the TV to External Speaker.

✎✎ When you set Speaker Select to External Speaker, the TV’s speakers are turned off. You will hear sound through the external speakers only. When you set Speaker Select to TV Speaker both the TV’s speakers and the external speakers are on. You will hear sound through both.

✎✎ When Speaker Select is set to External Speaker, the VOLUME and MUTE buttons will not operate and the sound settings will be limited.

✎✎ If there is no video signal, both the TV’s speakers and the external speakers will be mute.

Sound Reset

■■Reset All: Resets all sound settings to the factory defaults.

Preferred Language

(digital channels only)

Setup Menu

Digital-TV broadcasts are capable of simultaneous transmission of	❑❑ Setting the Time
many audio tracks (for example, simultaneous translations of the
program into foreign languages).	Time
✎✎ You can only select a language from among the ones being
	✎✎ The current time will appear every time you press the INFO
broadcasted.
Multi-Track Sound (MTS)	button.
	■■Clock: Setting the clock is for using various timer features of the
(analog channels only)	TV.
■■Mono: Choose for channels that are broadcasting in mono or if	✎✎ If you disconnect the power cord, you have to set the clock
	again.
you are having difficulty receiving a stereo signal.
	Clock Mode: Set the current time manually or automatically.
■■Stereo: Choose for channels that are broadcasting in stereo.
■■SAP: Choose to listen to the Separate Audio Program, which is	Clock Set: Set the Month, Day, Year, Hour, Minute and am/pm.
usually a foreign-language translation.	✎✎ Available only when Clock Mode is set to Manual.
✎✎ Depending on the program being broadcast, you can listen to	Time Zone: Select your time zone.
Mono, Stereo or SAP.	DST (Daylight Saving Time): Switches the DST (Daylight Saving
Auto Volume	Time) function on or off.
	✎✎ DST and Time Zone function is only available when the
Because each broadcasting station has its own signal conditions,	Clock Mode is set to Auto.
the volume may fluctuate each time channel is changed. This feature	■ Sleep Timer t
lets you automatically adjust the volume of the desired channel by	■
	Automatically shuts off the TV after a preset period of time. (30,
lowering the sound output when the modulation signal is high or by
	60, 90, 120, 150 and 180 minutes).
raising the sound output when the modulation signal is low.
	✎✎ To cancel the Sleep Timer, select Off.
SPDIF Output
	Timer 1 / Timer 2 / Timer 3
The SPDIF (Sony Philips Digital InterFace) outputs an uncompressed
digital audio signal when you connect the digital audio jack on the	Three different on / off timer settings can be made. You must set the
back of the TV to a digital audio in jack on a receiver or home theater.	clock first.
■■Audio Format: You can select the Digital Audio output (SPDIF)	■■On Time / Off Time: Set the hour, minute, am/pm and Activate /
format. The available Digital Audio output (SPDIF) format may differ	Inactivate. (To activate the timer with the setting you have chosen,
depending on the input source.	set to Activate.)
✎✎ By connecting the TV to a receiver or home theater with Dolby	■ Volume: Set the desired volume level.
	■

Digital and 5.1ch speakers and selecting Dolby Digital, you can maximize your interactive 3D sound experience.

- 7 -