Left Side View | Briggs & Stratton S200X instruction

Installation Instructions

S200X Suspension Seat Kit Part No. 5600136

For Snapper Pro S200X Models (5900664 & 5900692)

Kit Contents:

Part No.	Qty.	Description
5101214	1	Suspension Seat
5401044D	1	Extension, Seat Belt
5403471D	1	Plate, Seat Support
5101123	1	Sleeve Buckle, Seat Belt
5025010X6	1	Bolt, 1/4-20 X 3/4 GD5 YZ
5025391	1	Nut, 1/4-20 Hex Nylock Flange
5025154	1	Washer,1/4 SAE

WARNING

Before beginning any service work turn off the PTO, set the parking brake, turn off the ignition, and disconnect the spark plug wire(s).

Figure 1. Remove The Existing Seat

A.5/16-18 Nylock Flange Nuts

B.Seat Plate

Installing The Suspension Seat

1.Park machine on a flat, level surface and engage the parking brake. Disengage the PTO switch, turn off the engine and remove the key from the ignition.

2.Raise the seat plate (B, Figure 1) to gain access to the four (4) 5/16-18 nylock flange nuts (A) that secure the existing seat to the seat plate.

3.Remove the four (4) 5/16-18 nylock flange nuts and remove the seat from the seat plate. Retain the four

(4) 5/16-18 nylock flange nuts.

4.Using the 1/4 hardware secure (B, C & D, Figure 2) the seat support plate (A) to the seat plate.

5.See Figure 3. Install the new suspension seat onto the seat plate and secure using the four (4) 5/16-18 nylock flange nuts that were removed in step 3.

Installing The New Seat Belt Components

6.See Figure 4. On the right hand side of the machine, replace the existing seat sleeve buckle with the new seat sleeve buckle. Replace the existing seat belt extension plate with new seat belt extension plate.

A
	B
	C
	D
Left Side View of
Seat Plate	D
Seat Plate
B	C
	A

Figure 2. Install the Seat Support Plate

A. Seat Support Plate

B. 1/4-20 X 3/4 Bolt

C. 1/4 SAE Washer

D. 1/4-20 Hex Nylock Flange Nut

Briggs & Stratton Yard Power Products Group	1	5403602

Copyright © 2007 Briggs & Stratton Corporation		Rev. 8/2007
Milwaukee, WI, USA. All Rights Reserved.
	TP	200-7344-00-SK-SP