OPERATIONS and ADJUSTMENTS
1
2
2-Piece Harness Tie:
•To open: Squeeze tabs and pull apart.
•To close: Snap halves together. Make sure harness tie is locked by pulling out on each half.
Adjustable Handle:
•Handle has four adjustment positions.
•Push in red buttons on each side of handle, rotate and release red buttons. Continue rotating handle to desired position until you hear a “click” sound.
•IMPORTANT: Before lifting car seat, place handle in “locked” upright carrying position.
3Buckle:
3-Point Models
•To buckle: Push tongue down into slot. Pull up on tongue to be sure it is locked.
•To unbuckle: Press red button and pull tongue out.
•To buckle: Insert both tongues into buckle. Pull up on tongues to be sure they are locked.
•To unbuckle: Press red button and pull tongues out.
4Removing Car Seat from Base:
•Place handle in “locked” upright carrying position.
•Squeeze red release lever in base (fig. a).
•Lift car seat out of base.
5Adjustable Base:
•Pull blue adjustment Handle out (fig. b).
•Adjust Foot to desired position.
•Release adjustment handle. Be sure it retracts into slot.
10