Battery Installation | Assembly |
Hint: We recommend using alkaline batteries for longer battery life.
IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Mattel for replacement parts and instructions if needed. Never substitute parts.
1,5V x 4
Base Tube
“D” (LR20)
Left Base Wire
•Loosen the screws in the soothing unit battery compartment door. Remove the battery compartment door.
•Insert four “D” (LR20) alkaline batteries.
•Replace the battery compartment door.Tighten the screws.
•Protect the environment by not disposing of this product with household waste (2002/96/EC).
Check your local authority for recycling advice and facilities (Europe only).
Battery Safety Information
In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:
•Do not mix old and new batteries or batteries of different types: alkaline, standard
•Insert batteries as indicated inside the battery compartment.
•Remove batteries during long periods of
The batteries inside may explode or leak.
•Never
•Use only batteries of the same or equivalent type, as recommended.
•Do not charge
•Remove rechargeable batteries from the product before charging.
•If removable, rechargeable batteries are used, they are only to be charged under adult supervision.
1 | Right Base Wire |
•Place the base tube on a flat surface.
•Position the left and right base wires as shown.
•Fit the left base wire and right base wire into the base tube.
Feet Holes
2
•Position the feet so the holes are toward you and the
•Fit the feet on the base tube, as shown.
4