To Assemble Your Entertainer Activity Center

To Assemble Your

Entertainer™ Activity Center

Step 1.

Turn the tray over and locate the hole that the seat lock screws into. Place the seat lock on the tray as shown and screw it to the tray. DO NOT overtighten screw—seat lock must be free to slide.

Step 2.

Four tabs are located behind the indentations inside the seat ring. Remove the seat ring by pulling the four tabs out from under the tray, one at a time, while lifting the seat ring.

Solid color inside

Step 6.

Turn tray over. Push one leg into socket in tray exactly as shown until it snaps into place. Repeat for other two legs.

Button faces seat

RIGHTWRONG

Step 7.

On top of tray, CHECK that snaps are visible through slots. Pull on leg to be sure it is securely attached.

Step 9.

Assemble the toys on the tray as shown.

NOTE: Toys may be removed from tray for cleaning or storage.

Insert teether stalk into the tray.

	Insert	Retaining
	this	Retaining
	this	loops
	end
	first

Push beads firmly over the retaining loops on bead bar. Insert end with loops into the hole directly over leg, and turn bar until fully seated (retaining loops do not go into the hole). Then plug forked end of bar into the square hole in the tray.

Step 3.

Put the seat ring upside down inside the cloth seat. The high side of the seat ring goes to the back of the seat, where the warning label is located.

Attach the seat to the seat ring by tucking the seat edge into the channel and snapping the grommets on the pegs.

Step 4.

Turn the seat over and push the seat down into the seat ring.

Step 5.

Snap the seat ring back onto the tray. Make sure all four tabs are snapped onto the inside lip.

Grommet

Pattern side

Pattern side UP

Snaps visible

Step 8.

Slide the leg tubes on the tray onto the leg tubes on the base as shown.

HINT: If a tray leg tube will not slide onto the base leg tube, twist the base tube slightly to line up the parts.

Push in the buttons on each of the upper leg tubes and adjust the activity center to the desired height. The bottom edge of the upper tubes must be even with one of the three lines on the lower leg tube.

CHECK that all three leg tubes are set to the same height.

Buttons

Line

To Use the Seat Lock

Push gently on latch and turn the seat until latch engages in one of the four stop positions.

To allow seat to swivel again, pull lock out.

Tighten screw until clicker does not move freely—DO NOT overtighten— then loosen screw slightly.

To Adjust the Seat Height

Do not adjust height while child is in activity center.

Step 1.

Press in the buttons on each leg to adjust seat to desired height. The bottom edge of the upper tubes must be even with one of the three lines on the lower leg tube.

For your child’s safety, all three legs must be set to the same height. Tray must be level.

281-6-975

QC5070, 4113 specifications

The Graco 4113 and QC5070 are two standout products in Graco's extensive line of portable paint sprayers, aimed at delivering excellent performance, versatility, and ease of use for both professional contractors and DIY enthusiasts.

The Graco 4113 sprayer is engineered for those who require a reliable tool that can handle a wide range of painting projects. One of its main features is its ability to easily spray unthinned paints and stains, making it suitable for various applications, including residential and commercial jobs. The unit boasts a high-efficiency airless technology, which ensures a consistent spray pattern, reducing overspray while maximizing coverage.

Another hallmark feature of the 4113 is its lightweight design, which allows for effortless maneuverability, even during extended use. The sprayer comes equipped with a powerful ½ horsepower motor that can spray at a pressure of up to 2800 PSI, enabling users to take on challenging surfaces with ease. It also includes a flexible suction tube that lets you spray directly from a 1-gallon or 5-gallon paint bucket, ensuring maximum efficiency and minimizing downtime during the job.

On the other hand, the Graco QC5070 is particularly known for its Quick Change technology, which allows users to change the spray tip easily and quickly without the need for tools. This feature is invaluable for professionals who often switch between different coatings or projects, as it significantly reduces the time spent on setup. The QC5070 is designed to handle both small and large projects, making it a versatile choice for any painter.

Like the 4113, the QC5070 uses advanced airless technology for high-quality finishes. One important aspect is its built-in pressure control, which lets users adjust the pressure based on their specific application needs. This feature allows for better control and precision, ensuring that the right amount of material is applied for optimal results.

Both models emphasize user comfort with ergonomic handles and a design that reduces user fatigue during prolonged use. Additionally, Graco’s commitment to durability means that both sprayers are built to withstand the rigors of various job sites while maintaining performance.

In summary, the Graco 4113 and QC5070 are exemplary paint sprayers that highlight the brand's dedication to innovation and quality. Whether tackling DIY projects or professional jobs, users can rely on these tools to deliver reliable performance and outstanding results, paving the way for successful painting experiences.

To Assemble Your

Entertainer™ Activity Center

Step 1.

end

first

To Use the Seat Lock

To Adjust the Seat Height

QC5070, 4113 specifications