Graco PM-1373AD manual Placing Child in CAR Seat without harness system

Page 12

PLACING CHILD IN CAR SEAT - without harness system

WARNING

To prevent serious injury or death:

Shoulder belt MUST be properly positioned over shoulder (NOT touching child’s neck and NOT low off shoulder).

Lap/shoulder belt MUST be properly positioned exactly as shown in illustration with lap belt under both armrests and shoulder belt over one armrest.

DO NOT use shoulder belt loose or positioned under child’s arms or armrests (fig. a).

Never use a vehicle “lap-only” belt across front of child.

DO NOT allow child to slide down in car seat which could position lap belt across child’s abdomen and shoulder belt over neck or face.

If child will not keep vehicle shoulder belt properly positioned, DO NOT use this booster car seat. Use a different child restraint system.

Vehicle belts MUST lay flat against child and MUST not be twisted.

10

Remove harness system (see “Harness System - removal and re-assembly” section).

1Place child in car seat with child’s back flat against back of car seat.

2Place shoulder belt across child’s chest and lap belt under both armrests.

3Buckle belt and pull shoulder belt to adjust lap belt snugly.

Shoulder belt MUST lay across child’s shoulder in red zone as shown (fig. b). If outside of red zone, see next steps for Comfort Clip use.

CAUTION:

Some shoulder belts with (emergency locking) retractors allow a child to pull belt out and change position of belt. Use of Comfort Clip helps prevent child from pulling belt out.

4Thread shoulder belt through Comfort Clip exactly as shown (fig. c).

5Check to be sure shoulder belt is properly positioned over shoulder in red zone and snug against child.

Image 12
Contents Avoid injury or death Read and understand this manual Table of Contents Important Information Registration InformationPage Page Certification Unoccupied Car SeatCar Seat Useful Life Warm WeatherHeight and Weight Limits With Harness SystemOutgrowing Car Seat Without Harness SystemInstallation with harness system Installation without harness system Placing Child in CAR Seat with harness system Placing Child in CAR Seat with harness system Placing Child in CAR Seat without harness system Placing Child in CAR Seat without harness system Operations and Adjustments Harness TieBuckle Tether Strap fig. bLoosen Tighten Adjuster Harness Straps fig. c Changing Harness Strap Slots Fig. c Metal Plate Minimum Inches Fig. eHarness System removal and re-assembly RemovalClip With Shield On some models Vehicle Seat Belts Lap Belts Manually Adjustable Vehicle Seat BeltsFlip Without Harness System Lap Belts With Retractor Passive Restraint Lap Belt with Motorized Shoulder Belt Passive Restraint Lap or Shoulder Belt Mounted on DoorWith or Without Harness System Belts Forward of Seat Crease Combination Lap/Shoulder Belt with Locking Latch Plate With Harness System FlipCombination Lap/Shoulder Belt with Sliding Latch Plate PullLocking Clip Installation of Anchor Hardware Additional InformationAdditional Information Tether StorageCup Holder Available on some modelsCare & Cleaning Removing Seat PadsRemoving Armrest Pads Removing Cup Holder TabSeat Pad and Armrest Pads Harness StrapsShell Cup HolderAircraft Use Second Hand Car SeatPage Page Call US First

PM-1373AD specifications

The Graco PM-1373AD is a state-of-the-art airless paint sprayer that caters to both professional and DIY users. Renowned for its reliability and performance, this sprayer is designed to handle a variety of painting tasks with ease. One of the standout features of the PM-1373AD is its powerful motor, which ensures efficient paint application and a consistent finish. The robust design allows for thorough coverage, making it ideal for larger projects such as residential exteriors, fences, and decks.

One of the key characteristics of the Graco PM-1373AD is its FlexLiner system, which revolutionizes the way paint is delivered. This system includes a flexible bag liner that eliminates the need for traditional paint cups, reducing clean-up time and minimizing waste. The use of the FlexLiner also means that users can spray paint at any angle, enhancing versatility and ensuring that even hard-to-reach areas receive optimal coverage.

The PM-1373AD features an adjustable pressure control, allowing users to customize the spray pattern according to their specific needs. This adaptability is crucial for achieving different finishes, whether it's a fine mist for delicate tasks or a wider pattern for larger surfaces. The unit's easy-to-use controls simplify the spraying process, making it accessible for users of all skill levels.

Another notable technology integrated into the Graco PM-1373AD is the ProConnect system, which allows for tool-free replacement of the pump. This feature ensures minimal downtime in the event of a pump failure, making it a dependable choice for professionals who rely on their equipment for income-generating tasks. The sprayer’s lightweight design combined with its sturdy handle also enhances portability, allowing users to move it around job sites effortlessly.

Moreover, the PM-1373AD is compatible with a variety of coatings, including stains, paints, and primers. This versatility makes it a valuable addition to any painter’s toolkit. With its high-efficiency airless technology, the Graco PM-1373AD not only saves time but also delivers a smooth and even finish that enhances the aesthetic appeal of any surface.

In summary, the Graco PM-1373AD stands out for its performance, innovative features, and user-friendly design. Its combination of powerful motor output, FlexLiner system, adjustable pressure control, and ProConnect technology makes it a top choice for anyone seeking quality results in their painting projects.