Graco PD261467A owner manual Using Latch to install Base, Belt must lay flat and not be twisted

Page 35

6.4 Using LATCH to install Base

1.

For ease of installation, extend LATCH

Tongue ™

 

to its maximum length.

 

2.

Position base in vehicle seat as

 

 

shown.

 

3.

Thread LATCH through base belt

 

 

path normally used for vehicle seat

 

 

belt. Make sure that LATCH belt is

š

 

UNDER tongue on base ™.

 

 

 

Belt must lay flat and not be twisted.

 

4.

Hook Connectors to vehicle lower

 

 

anchors. Pull firmly on Connectors to

 

 

be sure they are attached š.

 

5.

Tighten LATCH by pushing down

›

 

hard on base and pulling the

 

 

adjustment belt ›.

 

6.

NEVER put two LATCH connectors on

 

 

one vehicle LATCH anchor unless

 

specifically allowed by the vehicle

œ

manufacturer œ.

 

7. Test infant restraint for secure installation as described in infant restraint “Final Safety Check” p.39.

8.Check that the LATCH stays tight and does not slip from the tightened position. If it does not stay tight, try another seating position or contact Customer Service.

35

Image 35
Contents SnugRide Classic Connect Important Information Features and ComponentsInfant Restraint Location Using Infant RestraintReplacement Parts Page Properly reclining the infant restraint For Recall Information Registration InformationRegister Your Infant Restraint Child Restraint Useful Life If You Need HelpLatch Features and ComponentsFront View Rear View Level Indicator Locking ClipRemoving and Attaching Base Adjusting HandleAttaching Canopy Step Seat Pad Assembly on certain modelsHead Support on certain models Harness Covers on certain models Cold Weather Boot On certain modelsImportant Information ‡ Never Leave Your Child Unattended Page Additional Warnings for Use as Carrier ‡ Weight 5-22 lbs .3-10 kg ‡ Height 29 inches 73 cm or less Height and Weight LimitsVehicle Seat Requirements Infant Restraint LocationVehicle Seat Belt Requirements ‡ /DS%HOWVRUZDUGRI6HDW&UHDVH Unsafe Vehicle Belt Systems‡ Lap Belts with Emergency Locking Retractor ELR ‡ Lap Belts with Automatic Locking Retractor ALR Safe Vehicle Belt SystemsWith Sliding Latch Plate To Install Locking Clip‡ &RPELQDWLRQ/DS6KRXOGHU%HOW Latch Locations Positioning Harness Straps Using Infant RestraintSafety Check Securing Child in Infant Restraint Click Make Sure the top of the childs Installing the Infant Restraint/Base Using Vehicle Belt Infant restraint with seat belt Base with seat beltPage Belt must lay flat and not be twisted Using Latch to install Base 7RUHPRYH/$7&+SXVKEXWWRQZKLOH Reclining Infant Restraint/Base When using the base Final Safety Check Every time you drive with your child Storing Latch Additional InformationAirplane Use To Remove Cleaning and MaintenancePage Prevent Serious Injury or Death Buckle Cleaning ProcessReplacement Parts LEA Este Manual Guarde Estas Instrucciones Para USO Futuro Información importante Funciones y componentesPiezas de repuesto Ubicación del sistema de seguridad para niñosUsar el asiento de seguridad infantil Información adicional -41 7.1 Uso en avionesAdvertencias a padres y otros usuarios La seguridad de su niño depende de Registro de su sistema de seguridad para niños Información sobre el registroVida útil del sistema de seguridad para niños Funciones y componentes Vista Delantera Traba de seguridad Vista TraseraAjuste de la manija Sacar y conectar la baseColocación de la capota Paso Armado de la almohadilla del asiento ciertos modelosApoyacabezas en ciertos modelos Cubiertas de arnes ciertos modelos Bota para tiempo frío En ciertos modelosAdvertencias para uso como sistema de seguridad para niños Información importante‡ Nunca Deje a SU Niño Solo Advertencias para el uso con un cochecito Advertencias adicionales para el uso como transportador Limitaciones de peso y estatura Ubicación del sistema de seguridad para niños Requisitos del cinturón de seguridad del vehículo Hombro motorizado Sistemas Peligrosos de cinturones para vehículos‡ &LQWXUyQGHVHguridad abdominal ajustado manualmente Sistemas Seguros de cinturones de vehículosPara instalar la traba de seguridad Ubicación del Latch Colocación de las correas del arnés Usar el asiento de seguridad infantil95,,&$&,Ð16*85,$ Sujetar el niño en el sistema de seguridad para niños ¡CLIC 95,,&$&,Ð16*85,$ Tenga LA Seguridad de que la Page Sistema de seguridad para niños con cinturón de seguridad Base con cinturón de seguridadPage El cinturón debe mantenerse en posición plana sin torcerse Uso del Latch para instalar la basePage Inclinación del sistema de seguridad para niños/base Cuando usa la base Page Uso en aviones Información adicional Para Sacar Y Lavar LA Almohadilla DE Page Sumerja LAS Correas DEL Arnés Prevenga Lesiones Graves O LA MuertePiezas de repuesto

PD261467A specifications

The Graco PD261467A is a high-performance airless paint sprayer designed for both residential and professional applications. With its robust features and advanced technologies, this sprayer stands out in the market, making it an excellent choice for homeowners, contractors, and DIY enthusiasts seeking efficiency and quality in their painting projects.

One of the key features of the Graco PD261467A is its powerful motor, which delivers consistent pressure and flow for a smooth and even finish. This professional-grade motor is capable of handling a wide range of paint materials, from thick latex paints to stains and sealers. The sprayer comes with a significant fluid output capability, allowing users to complete larger jobs quickly without sacrificing quality.

The PD261467A is equipped with Graco’s ProXChange technology, which offers an innovative solution for maintaining the sprayer. Users can effortlessly swap out the pump without any tools, minimizing downtime and maximizing productivity on the job site. This feature is particularly beneficial for professionals who rely on their equipment day in and day out.

Another standout characteristic of the Graco PD261467A is its adjustable pressure control. This feature allows users to fine-tune the sprayer’s output to achieve the desired finish for various surfaces and materials. Whether tackling rough exteriors or delicate indoor finishes, this flexibility ensures that the user can adapt to different project requirements seamlessly.

Additionally, the sprayer incorporates Graco’s SureFlo system, which ensures that paint is always ready for use. This means reduced paint spillage and waste, allowing users to make the most of their materials. The PD261467A also features a lightweight design, making it easy to maneuver and transport, which is essential for larger jobs or multi-site projects.

Compatibility with a variety of tips enhances the versatility of the PD261467A, allowing users to choose the right spray pattern and fineness for their specific applications. This adaptability is key in achieving professional-level results regardless of the task at hand.

In summary, the Graco PD261467A airless paint sprayer is an exceptional tool that combines power, versatility, and ease of use. With its advanced technologies and user-friendly features, it caters to the needs of both professionals and DIYers, making painting projects more efficient and effective. Whether for indoor or outdoor jobs, the Graco PD261467A is an investment in quality and performance that promises excellent results every time.