Graco PD238270A owner manual Storing Lower Anchors and Tether Latch

Page 60

19.1 Storing Lower Anchors and Tether (LATCH)

)RUHDVHRIVWRULQJH[WHQGLATCH to its maximum length.

2.Locate the storage bars on back of child restraint .

3.Fasten ends of tether and lower anchors onto their respective storage bars as shown

.

Storage bars located on each side at the back of the seat

4.Tether and lower anchors storage should look like this when complete .

Tether
Lower
anchors

	Lower
	anchors

60

Image 60

Contents Read this Manual Table of Contents Table of Contents Page Properly routing the vehicle seat belt or Latch Properly securing your child in the child restraintModel Number Date of Manufacture Purchase Date Register Your Child Restraint&HUWLÀFDWLRQ Features Harness Straps Assembling the Child Restraint ArmClick Click Assembly is now complete ‡DO not Install or USE this Child Page Height and Weight Limitations With Built-In HarnessWithout Built-in Harness Mass between 13.6 and 45 kg ‡+HLJKWWRLQFKHVWithout Back Support ‡DQGDUHEHWZHHQDQGLQFKHVChoosing an Appropriate Vehicle Seat Location Vehicle Seat Belt Requirements Safe Vehicle Seat Belt SystemsFor Built-in Harness Only ‡ Lap Belts with Automatic Locking Retractor ALRWith or Without Built-in Harness Unsafe Vehicle Belt Systems ‡ Lap Belts with Emergency Locking Retractor ELR‡ Passive Restraint Lap or Shoulder Belt Mounted on Door ‡ Passive Restraint Lap Belt with Motorized Shoulder Belt ‡ Lap Belts Forward of Seat CreaseWhat is LATCH? LatchPage Latch System Using Child Restraint with Built-in Harness Page Harness straps must go into the slots 7RDGMXVWKDUQHVVVWUDSVPage Must Page Lower anchors must be stored when using vehicle belt Securing the Child Restraint in Your VehicleTighten vehicle seat belt Safety Check for Secure Installation With Latch WKH7HWKHUSDJH Securing Your Child in the Child Restraint ‡Avoid bulky clothingFasten harness clip š. Position harness Harness Removal Remove harness strapsPage 2QWKHUHDURIWKHVHDWGHWDFKORZHUVHDW Harness Strap Arm Page Using Your Child Restraint Without Built-in Harness Incorrectincorrect Incorrect Incorrect Securing Child & Booster Seat in Vehicle Adjusting Head Support When using with or without the built-in harness7RDGMXVWKHDGVXSSRUWVLGHZLQJV Removing Back Support Page Page Page Page Rear View of Child Sitting in Seat Correct Using the Tether Storing Lower Anchors and Tether Latch Airplane Use Important points to rememberTo prevent ejection in sudden stop or crash ™ › ž œ Recline FootCare and Maintenance Care and Maintenance Buckle Cleaning Process 3UHYHQWVHULRXVLQMXU\RUGHDWKTo Remove Seat Cover BleachPage Replacement Parts and Warranty