Graco 571003, 571004 important safety instructions Drum Installation/Replacement, Removal

Page 6

Operation

Drum Installation/Replacement

Installation

3. Lower Drum Adjustment Dial (D) and pull Drum

NOTE: Carbide Flail Cutter drums do not require

Engage Lever (E) so drum rests on ground.

 

specific orientation or direction. Carbide Millers and

 

Diamond Blades are directional. They should be stacked

 

so that the arrows on the Millers and Blades face the

 

same direction as the rotation of the drum.

 

ti15141a Carbide Miller

Diamond Blade

 

ti15142a

270 and 390 models are designed for “forward cut” grinding (the drum rotates in the same direction that it travels). 480 models are design for “reverse (up cut)” grinding (the drum rotates in the opposite direction that it travels).

ti15137a

ti15138a

 

ti14756a

ti14755a

 

Door pin and hole should line up.

ti15256a

4. Tighten four bolts on Drum Access Panel (H).

Forward Cut (270/390 Models)

Reverse (up cut) 480 Models

1. Slide replacement Drum onto hex shaft.

ti15257a

5. Turn Drum Adjustment Dial (D) to maximum height.

Removal

1. Remove four bolts and Drum Access Panel (H).

ti14766a

2. Replace Drum Access Panel (H).

ti14767a

2. Slide drum off of hex shaft.

ti14764a

ti14765a

6

3A0101B

Image 6
Contents Model 571004 Reverse up-cut Must be used with LineDriver Model 571002 Forward cutModel 571003 Forward cut GrindLazer 270 Related ManualsMoving Vehicle Hazard Dust and Debris HazardEquipment Misuse Hazard Moving Parts HazardFire and Explosion Hazard Carbon Monoxide HazardPersonal Protective Equipment Models Component Identification390 Models Component DescriptionOperation Start-UpDrum Installation/Replacement InstallationRemoval Starting the Engine Start EngineCutting Material How to Level the Drum Replacement,Depth Control Wheels Clean Up Stop Cutting MaterialHandle Bar Adjustment Cutting Drum AssembliesMaintenance Caster Wheel MaintenanceFront Swivel Tire Alignment Technical Data GrindLazer 270 ModelGraco Standard Warranty Graco Information

571004, 571003 specifications

Graco 571003 and 571004 are two exceptional models in Graco's line of airless paint sprayers, designed for both professionals and DIY enthusiasts who seek efficiency and superior finish quality in their painting projects.

The Graco 571003 is a robust unit engineered for small to medium-sized jobs, while the Graco 571004 caters to larger applications with its enhanced features and performance capabilities. Both units emphasize convenience, portability, and versatility, making them ideal for a variety of tasks, including interior and exterior painting, staining, and sealing projects.

One of the main features of both models is their ProXChange pump technology, which allows for quick and easy pump replacement on the job site, ensuring minimal downtime. The cordless designs enhance mobility, allowing users to move freely without being tethered to power outlets. The Graco 571003 boasts a compact design, making it easy to transport and store, while the 571004 provides a more powerful motor for extended applications, coming with a higher material flow rate.

Both models also incorporate a durable, easy-to-clean design. The reverse-a-clean feature helps quickly clear clogs in the spray tip, maintaining an uninterrupted workflow. The RAC X tip and guard system offers superior control over spray patterns, allowing for fine-tuning to achieve the desired finish without overspray.

In terms of technology, Graco has integrated a pressure control technology that allows users to adjust the pressure output to suit different materials and applications. This advancement means that both inexperienced painters and seasoned pros can use these sprayers confidently, ensuring an optimally smooth finish.

Additionally, the flexible suction tube allows users to spray directly from a bucket or other containers, making them versatile for various material types. They can handle a range of coatings, from thick latex paints to primers and stains, demonstrating their versatility on different surfaces, including wood, metal, and drywall.

In summary, the Graco 571003 and 571004 airless paint sprayers are designed for efficiency, offering unique features and innovative technology that simplify the painting process. With their durability, ease of use, and superior spraying performance, these models stand out in the competitive market of paint spraying equipment, making them ideal choices for a wide range of painting projects.