Graco 35 Under the seat flap. Pull the shoulder, Junction plate ➍ From front, pull straps through

Page 21

A. Push the harness adjustment button

➌

under the seat flap. Pull the shoulder

straps out to loosen the harness ➌.

 

B. From behind seat, pull the metal

 

junction plate down behind the ownerÊs

 

manual pocket and remove the ends of

 

the two shoulder straps from the metal

 

junction plate ➍.

 

C. From front, pull straps through the

Harness adjustment

harness slots and then reinsert them

button

through the appropriate slots. Both

 

harness straps must be through the

 

same set of slots in the seat and pad.

➍

D. From behind seat, push both shoulder

straps UNDER ownerÊs manual pocket

 

and out the bottom ➍.

 

E. Depending on the size of your child, you

 

may need to adjust the harness straps or

 

waist straps as shown on pages 23-24.

 

Reassemble the strap ends onto the metal

 

junction plate ➍. You will be able to use

 

various combinations of shoulder strap

Metal junction

loops and waist strap loops to get a snug

fit for your child.

plate

5.SAFETY CHECK:

a)CHECK that straps are not twisted in front or back;

b)CHECK that straps are secure by pulling on harness straps from the front of the seat.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents SnugRide Important Information Features and Components Installing the Infant Restraint and Base Installing the Infant Restraint Without BaseYour childÊs safety depends on Properly reclining the infant restraint Properly routing the vehicle seat belt or LatchRegister Your Infant Restraint For Recall InformationGraco ChildrenÊs Products Inc Oaklands Blvd Exton, PA If You Need Help AIR BAG. If the air bag inflates, it can hit Important InformationNever Leave Your Child Unattended Page Additional Warnings for Use as Carrier Your child Must meet the following requirements Height and Weight LimitsFeatures and Components Clip LockingBase Press handle adjustment buttons on both sides of handle ➊ Adjusting HandlePositions Position a Must be used When carrying by handle Removing and Attaching Infant RestraintAttaching Canopy Head Support on certain models, styles vary Cold Weather Boot on certain models, styles vary ChildÊs shoulders ➋ Positioning Harness StrapsTo the proper harness slots by doing FollowingJunction plate ➍ From front, pull straps through Under the seat flap. Pull the shoulderHarness slots and then reinsert them Through the appropriate slots. BothShoulder Straps for a Smaller Baby Shoulder Straps for a Larger BabyTo Shorten Waist Straps for a Smaller Baby To Lengthen Waist Straps for a Larger Baby. Snap anchor Clips back into seat as Repeat On other sideMove infant restraint handle to sitting position see Securing Child in Infant RestraintSnap harness clip pieces together ➍ ArmpitsCheck that harness straps are not twisted Vehicle Seat Requirements Choosing an Appropriate Vehicle Seat LocationVehicle seat must face forward Vehicle Seat Belt RequirementsUnsafe Vehicle Belt Systems Do not use vehicle belts thatLap Belts Forward of Seat Crease Safe Vehicle Belt Systems When buckled, the belt isLap Belts with Automatic Locking Retractor ALRWith Locking Latch Plate Without allowing it to slip Latch Locations How to Install the Infant Restraint/Base Belt should not be twisted or turned Installing the Infant Restraint and Base Using Vehicle BeltBelts Must go Under lock-off Page Belt must lay flat and not be twisted Using Latch to install BaseReclining Infant Restraint/Base To Adjust Recline on Base Final Safety Check Every time you drive with your child Storing Latch Airplane UseTTO Remove and Wash Cleaning and MaintenanceOr an infant restraint whose history you do not know Or thin blanket to protect upholsteryTo purchase parts or accessories or for warranty Replacement PartsGraco PD115605A 7/09 US Información importante Piezas de repuesto Advertencias a padres y otros dueños Recline debidamente el sistema de seguridad para bebés Registro de su sistema de seguridad para bebés Información sobre el registroPage Advertencias para uso como sistema de seguridad para bebés Información importanteNunca Deje a SU Niño Solo Advertencias para el uso con un cochecito Advertencias adicionales para el uso como transportador Limitaciones de peso y estatura Funciones y componentes Vista Trasera Base Sacar y conectar el sistema de seguridad para bebés Ajuste de la manijaColocación de la capota ➊ ➋ Apoyacabezas en ciertos modelos, los estilos varíanCubiertas de arnés ciertos modelos Bota para tiempo frío en ciertos modelos, los estilos varíanColocación de las correas del arnés Uso del sistema de seguridad para bebésVerificación DE Seguridad Correas para los hombros para un niño MÁS Grande Page Sujetar el niño en el sistema de seguridad Verificación DE Seguridad Requisitos del asiento del vehículo Cómo elegir un lugar apropiado para el asiento del vehículoRequisitos del cinturón de seguridad del vehículo Sistemas Peligrosos de cinturones de vehículos Sistemas Seguros de cinturones de vehículos Page Para instalar la traba de seguridad no lo use con la base Ubicación del Latch Instalación del sistema de seguridad para bebés/base Traba Page Page Utilización del Latch para instalar la base Inclinación del sistema de seguridad para bebés/base Para ajustar la inclinación sobre la base Page Almacenamiento del Latch Uso en aeronavesPara Sacar Y Lavar Limpieza y mantenimientoLa Hebilla puede limpiarse con un trapo húmedo Piezas de repuesto
Related manuals
Manual 176 pages 18.91 Kb

1760658, 1760657, 35 specifications

The Graco 35 is a highly praised infant car seat that has gained popularity among new parents for its blend of safety, comfort, and convenience. Designed for children weighing up to 35 pounds and up to 32 inches tall, the Graco 35 provides a secure and reliable option for car travel during the crucial early months of your child's life.

One of the standout features of the Graco 35 is its exceptional safety technology. The seat is equipped with a robust frame that meets or exceeds U.S. safety standards, providing peace of mind to parents. It includes an adjustable base with a level indicator that helps ensure the seat is installed at the correct angle, reducing the risk of misuse. The car seat also incorporates energy-absorbing foam and a side-impact protection system to further enhance safety during a collision.

Comfort is paramount when it comes to the Graco 35, and it shows in its thoughtfully designed padded seat. The seat cushion is removable and machine washable, making it easy to keep clean and fresh for your baby. Additionally, the adjustable harness system can be modified as your child grows, ensuring a snug and secure fit at all stages.

The Graco 35 also places a strong emphasis on convenience. Its lightweight design allows for easy transport in and out of the vehicle, making it simple to move your child without disturbing their sleep. The car seat is compatible with many Graco strollers, creating a convenient travel system that allows parents to traverse various environments effortlessly.

Moreover, the Graco 35 features a one-hand adjustable handle, providing added ease when carrying the seat. Its canopy is designed to protect your baby from the sun and elements, making outdoor adventures more comfortable.

In conclusion, the Graco 35 is an excellent choice for parents seeking a reliable, safe, and comfortable car seat for their infant. With its focus on safety features, comfort, and ease of use, the Graco 35 stands out in the competitive world of infant car seats, ensuring that both parents and their little ones enjoy peace of mind during every journey. Whether running routine errands or embarking on a family adventure, the Graco 35 delivers on every front.
Top Page Image Contents