To Use the Seat Lock, To Adjust the Seat Height

Step 9.

Assemble the toys on the tray as shown. The mirror, squeaker, and music button are already assembled.

	Mirror and music button—
NOTE: Most toys may	DO NOT allow liquids
be removed from tray	around music button.
for cleaning or storage.
Insert teether
stalk into the tray.
Squeaker
(Note:
Squeaker
will not work
in storage
position.)

Mount ring toys onto loop, then insert ends of loop into holes on tray. Short end of loop goes directly over leg. The loop and ring toys will not be removable.

Place tumbler into oval space as shown, then use two screws provided to attach it from underneath tray. DO NOT over- tighten screw.

Tighten screw until clicker does not move freely—DO NOT overtighten— then loosen screw slightly.

Set duck pond in round space provided. Then place retainer ring over it, pushing all four tabs into slots in tray.

To Use the Seat Lock

Push gently on latch and turn the seat until latch engages in one of the four stop positions.

To allow seat to swivel again, pull lock out.

To Adjust the Seat Height

Do not adjust height while child is in activity center.

Step 1.

Press in the buttons on each leg to adjust seat to desired height. The bottom edge of the upper tubes must be even with one of the three lines on the lower leg tube.

For your child’s safety, all three legs must be set to the same height. Tray must be level.