Installing the Batteries Starting the Swing

Installing the Batteries

Starting the Swing

Step 1.

With baby out of swing, open the battery compartment lid by inserting a coin (penny, nickel or dime) into the coin slot. After the lid pops open, swing it down and remove it.

Coin slot

CHECK that all parts are securely fastened together before using the swing.

Step 1.

Open the waist belt. Place baby in the seat. (If your child is very small, you may want to use rolled-up blankets as a prop.)

Step 2.

Insert four “D” cells. Alkaline or Ni-Cad “D” cells are best. CHECK that the batteries are put in correctly. Your swing will not run if the batteries are put in backwards.

Step 3.

To replace lid, put the two tabs of the lid into the two slots in the bottom of the motor housing. Swing lid up, and press it into place until you hear the latch click.

Step 2.

Fasten the waist belt. Adjust belt as needed to get a snug fit around your child.

Do not depend on the tray alone to hold your baby. Always secure your baby with the waist belt when your child is in the swing.

Step 3.

To start swing, slide the speed button to the desired speed and give the swing a gentle push.

Observe the swinging motion for a minute. It takes time for the swing to adjust to a set- ting. Change setting if needed.

Step 4.

To turn swing off, slide switch to the center OFF position.

Indicator Light- Red light comes on when swing is turned on.

Your seat may be stopped at any time the motor is running without damaging the motor. Push swing to restart.

If your swing motor stops operating by itself, a protective device may have been activated. Turn off motor, wait three minutes, then restart swing.

11
11	12

1421, 1422, 1420 specifications

The Graco 1422, 1421, and 1420 series are a trio of airless paint sprayers known for their efficiency, versatility, and user-friendly features that cater to both amateur DIY enthusiasts and professional painters. These models are engineered to provide an exceptional spraying experience, ensuring smooth application across various surfaces.

One of the standout features of the Graco 1420 series is its ability to deliver high-quality finishes. With powerful motors and advanced pump technologies, these sprayers can handle a wide range of materials, including latex paints, stains, and sealers. The Graco 1422 model, for instance, is equipped with a robust motor and can achieve pressures up to 3000 PSI, making it suitable for both indoor and outdoor projects.

Another key technology incorporated in the Graco 1420 series is the ProConnect system, which allows for quick and easy pump replacement. This feature minimizes downtime, ensuring that users can keep their projects moving forward without lengthy interruptions. Additionally, the series includes a FlexLiner bag system for easy paint handling and cleaning. The FlexLiner bags are not only convenient but also reduce the amount of paint wasted, enabling efficient usage of materials.

The Graco 1421 sprayer stands out for its compact design, making it easy to transport and maneuver in tight spaces. Its lightweight construction means users can easily carry it to various job sites without strain. Moreover, the series includes a range of tip sizes, allowing users to customize the spray pattern and flow rate according to specific project requirements.

Durability is a hallmark of the Graco brand, and the 1420 series is no exception. Built with high-quality materials, these sprayers are designed to withstand the rigors of frequent use. They feature easy-to-access filters that help maintain the longevity of the pump and prevent clogs during operation.

Finally, the ergonomic design of the spray guns enhances comfort during use, reducing fatigue for operators during extended sessions. With a focus on innovation, reliability, and performance, the Graco 1422, 1421, and 1420 models are standout choices for anyone looking to achieve professional results in their painting projects. Whether for home renovations or large-scale commercial jobs, these sprayers offer the reliability and efficiency needed to get the job done right.