Graco ISPC089BA owner manual Using Latch to install Base, For ease of installation, extend Latch

Page 37

6.4Using LATCH to install Base

1.

For ease of installation, extend LATCH

Tongue

 

to its maximum length.

 

2.

Position base in vehicle seat as

 

 

shown.

 

3.

Thread LATCH through base belt

 

 

path normally used for vehicle

 

 

seat belt. Make sure that LATCH is

 

 

UNDER tongue on base .

 

 

Belt must lay flat and not be twisted.

 

4.

Hook Connectors to vehicle lower

 

 

anchors. Pull firmly on Connectors to

 

 

be sure they are attached .

 

5.

Tighten LATCH by pushing down

 

 

hard on base and pulling the

 

 

adjustment belt .

 

6.

NEVER put two LATCH connectors on

 

 

one vehicle LATCH anchor unless

 

 

specifically allowed by the vehicle

 

 

manufacturer .

 

7.

Test infant restraint for secure

 

 

installation as described in infant

 

 

restraint “Final Safety Check” p.40.

 

8.Check that the LATCH stays tight and does not slip from the tightened position. If it does not stay tight, try another seating position or contact Customer Service.

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Infant Restraint/Carrier Features and Components Additional Information Properly securing your child in the infant restraint Your child’s safety depends onProperly reclining the infant restraint Properly routing the vehicle seat belt or LatchRegister Your Infant Restraint Registration InformationRecall Information Exton, PAIf You Need Help Adjustable Foot Base Features and ComponentsFront View 3-POINT Harness 3-Point Harness ModelHarness Slot Attachment Latch Locking Clip Rear View 3-POINT HarnessFront View 5-POINT Harness 5-Point Harness ModelRear View 5-POINT Harness Level Indicator Locking ClipRemoving and Attaching Base Adjusting HandleNever use positions B or C in the vehicle Canopy support parts Attaching Canopy on certain modelsTo remove canopy, reverse the steps Head Support on certain models Cold Weather Boot on certain modelsDo not Place this Infant Restraint Important InformationNever Leave Your Child Unattended Page Additional Warnings for Use as Carrier Weight 5-22 lbs 2.3-10 kg Height 29 inches 73 cm or less Height and Weight LimitsYour child Must meet all requirements Vehicle Seat Requirements Infant Restraint LocationWhenever possible, secure the infant Watch the child. If the driver is the onlyVehicle seat must face forward Vehicle Seat Belt RequirementsUnsafe Vehicle Belt Systems Passenger when the door is closedA crash or sudden stop Passive Restraint Lap Belt with Motorized Shoulder BeltLap Belts with Automatic Locking Retractor ALR Safe Vehicle Belt SystemsBelt without allowing it to slip To Install Locking ClipVehicle Lower Anchor Points Seat Crease Latch locationsPositioning Harness Straps Using Infant Restraint1 3-Point Harness p 2 5-Point Harness p 1 3-Point Harness Safety CheckReinsert harness anchor buckle in the appropriate slot Check that straps are not twisted2 5-Point Harness After the harness has been completely reinstalledThrough the appropriate slots Check that straps are secure by pulling on themFor Larger Baby For Smaller BabyUse upper harness slots and the end strap loops Open harness clip by Squeezing both sides Unbuckle as shown Securing Child in Infant RestraintDown over your child Follow directions for your harness 1 3-Point Harness Snap harness clip pieces together Do not use the infant restraint ifCheck that harness straps are not twisted Installing the Infant Restraint/Base Using Vehicle Belt Base with seat belt Thread the seat beltInfant restraint with seat belt Be twisted or turnedPull and tighten the vehicle belt For ease of installation, extend Latch Using Latch to install BaseReclining Infant Restraint/Base When using the base Final Safety Check Every time you drive with your child Airplane Use Additional InformationStoring Latch Locate the storage bars onWhen complete Cleaning and MaintenanceRepeat for Latch with Page Replacement Parts Asiento de seguridad infantil/portabebés Advertencias para uso como sistema de seguridad Piezas de repuesto De su vehículo Advertencias a padres y otros usuariosEl mismo Registro de su sistema de seguridad para niños Información sobre el registroInformación sobre el retiro de productos del mercado Si necesita ayudaApoyapiés ajustable Base Funciones y componentesVista Delantera Arnés DE 3 Puntos Modelo con arnés de 3 puntosIndicador Del nivel Vista Trasera Arnés DE 3 PuntosVista Delantera Arnés DE 5 Puntos Modelo con arnés de 5 puntosVista Trasera Arnés DE 5 Puntos Ajuste de la manija Sacar y conectar la baseAmbos botones de ajuste de Colocación de la capota ciertos modelos Bota para tiempo frío en ciertos modelos Apoyacabezas en ciertos modelosEn el cojín Del cinturón del vehículo como se indicaAdvertencias para uso como sistema de seguridad para niños Información importanteAire se infla, puede golpear al niño y al sistema de Nunca Deje a SU Niño Solo Advertencias para el uso con un cochecito No cuelgue cordones sobre o encima del transportador Advertencias adicionales para el uso como transportadorNo ponga cordones a los juguetes Su niño Debe cumplir con todos los requisitos Limitaciones de peso y estaturaNunca Ponga Este Sistema DE Seguridad Ubicación del sistema de seguridad para niñosRequisitos del cinturón de seguridad del vehículo Cinturón de seguridad abdominal LatchSistemas Seguros de cinturones para vehículos Seguridad con traba móvil Ubicación del Latch Colocación de las correas del arnés Usar el asiento de seguridad infantilTirar la hebilla de la ranura 1 Arnés de 3 puntosVerificación DE Seguridad Vuelva a colocarlas a través de las ranuras apropiadas 2 Arnés de 5 puntosDel manual del propietario para que salgan de abajo Para Bebés MÁS Grandes Para UN Bebé PequeñoLas ranuras de la placa de unión Siga las instrucciones según su arnés Cómo sujetar el niño en al sistema de seguridad para niños1 Arnés de 3 puntos página 2 Arnés de 5 puntos página Niño Las correas como se indicaVerifique que las correas del arnés no estén dobladas Trabe la hebilla del arnés No use el sistema de seguridad para21 a Pase el cinturón de seguridad Page Uso del Latch para instalar la base Inclinación del sistema de seguridad para niños/base Cuando usa la base Page Uso en aviones Información adicionalAlmacenamiento del Latch Parte inferior de La base De las correas del arnés, páginas 27 y Limpieza y mantenimientoLa Hebilla puede limpiarse con un trapo húmedo Piezas de repuesto Step
Related manuals
Manual 89 pages 30.27 Kb

ISPC089BA specifications

The Graco ISPC089BA is a versatile and innovative car seat designed to provide maximum safety and comfort for children during travel. With a focus on ease of use and adaptability, this model serves as an ideal solution for parents seeking reliability and functionality in a car seat.

Among its main features, the Graco ISPC089BA boasts a 3-in-1 design that accommodates growing children. This car seat can function as a rear-facing infant seat, a forward-facing harness seat, and a high-back booster, making it an excellent investment as it transitions with your child from birth to preschool age. The rear-facing mode is suitable for children weighing between 4 to 40 pounds, while the forward-facing mode supports kids from 22 to 65 pounds. As a booster, it safely secures children weighing between 40 to 100 pounds, ensuring longevity in use.

The ISPC089BA integrates Graco’s Secure Connection Technology, which simplifies the car seat installation process. This innovative system ensures a solid connection to the vehicle with audible clicks, giving parents peace of mind that the seat is securely in place. The car seat also features a one-hand adjustable headrest and harness, allowing for customizable fit as your child grows.

Safety is paramount, and the Graco ISPC089BA offers comprehensive protection through its robust side-impact protection system. This is coupled with a steel-reinforced frame that enhances durability. The energy-absorbing foam lining boosts impact protection, ensuring that children are shielded from potential harm in the event of a collision.

Another noteworthy characteristic is the ease of maintaining cleanliness, as the seat comes with a machine-washable cover. This is a practical feature for busy families, allowing for quick clean-ups after spills or accidents.

In terms of comfort, the ISPC089BA is designed with plush padding and breathable fabric, ensuring that children remain comfortable on long journeys. The adjustable armrests further enhance the seating experience.

Overall, the Graco ISPC089BA car seat is a reliable choice for parents seeking a safe, user-friendly, and adaptable child restraint system. With its innovative design and emphasis on safety, it stands out as a leading option in the competitive market of car seats.
Top Page Image Contents