Graco A5220, A3930, 2794 warranty TroubleShooting

Page 6

TroubleShooting

DO NOT ATTEMPT to modify the unit. Any modifications to the transmitter and/or receiver can void the opera- tor’s authority to operate the equipment.

Pairing Parent Units and Child Units

Most problems have a simple solution. First, check that:

Power is turned ON for both units

Both units are plugged in (or batteries are fresh in Nursery Unit and fully charged in Parent Unit)

Electrical outlet works

Volume is turned up on Parent Unit

Parent Unit is in range of the Nursery Unit

No Sound

Battery dead or weak — replace or use AC adapter.

AC adapter not properly connected — check the connec- tions.

Nursery Unit covered or blocked — remove the obstruc- tion.

Weak Sound

Nursery Unit too far from baby — move closer.

Large objects blocking the signal — try repositioning Nursery Unit.

Volume setting too low — turn it up.

Static

Interference from other electrical equipment — eliminate cause of static (TVs, mixers, computers, fans, fluorescent lights, light dimmers, etc.)

Parent Unit too far from Nursery Unit — move them closer.

Significant amount of obstructions between Parent Unit and Nursery Unit such as walls, ceilings & buildings. Try moving the Nursery Unit to another part of the room.

Change channel on Nursery Unit.

Shrill Sound (Feedback)

Nursery Unit and Parent Unit too close together — move them farther apart.

Volume set too high — lower the volume.

To ensure privacy, your two Parent Units are paired with your two Nursery Units at the factory. Your Parent Units will not work with any other Nursery Units.

If a Parent Unit won’t lock onto a Nursery Unit, or you purchased a new Nursery Unit, follow the procedure below to pair the Parent Units and Nursery Units. If you purchased a new Parent Unit, skip Step 1. The new Parent Unit is ready to pair with your Nursery Units.

1. Erase the Pairing from the Parent Unit

•Turn the Parent Unit off.

•Hold the Volume Down Button on the Parent Unit while press- ing the On/Off Button. Continue to hold the Volume Down Button until you hear a single beep and all of the yellow Sound Lights illuminate briefly.

•Release the Volume Down Button.

•Press and hold the Volume Down Button again.

•Within 2 seconds you will hear a beep. Release the Volume Down Button. All of the yellow Sound Lights and the red Loss Connection LED will be lit. The Parent Unit is ready to pair with both nursery units.

2. Pair the Parent Unit with Nursery Unit 1

•Place Nursery Unit 1 in the same room, five (5) feet (1.5 meters) away from the Parent Unit.

•Turn on Nursery Unit 1 using the On/Off Button on the side. The green power light should come on.

•Within a few seconds, the Parent Unit will find Nursery Unit 1. The yellow Sound Lights will shut off and the Parent Unit will beep. The Parent Unit is now paired with Nursery Unit 1.

•The green Sound Lights will be lit. The Parent Unit is ready to pair with Nursery Unit 2.

3.Pair the Parent Unit with Nursery Unit 2

•Place Nursery Unit 2 in the same room, five (5) feet (1.5 meters) away from the Parent Unit.

•Turn on Nursery Unit 2 using the On/Off Button on the side. The green power light should come on.

•Within a few seconds, the Parent Unit will find Nursery Unit 2. The green Sound Lights will shut off and the Parent Unit will beep. The Parent Unit is now paired with Nursery Unit 2.

•The Parent Unit will begin monitoring normally.

4.Repeat this procedure if you need to pair another Parent Unit with the Nursery Units

Nothing happened when I turned on the Nursery Unit. What do I do?

•First try turning the Nursery Unit off, and then on again.

•If the Parent Unit still does not pair with the Nursery Unit, press the Channel Button on the Nursery Unit, then turn the Nursery Unit off, and then on again.

6

Image 6
Contents Product Features 2794Use only with 110-120 volt AC electrical outlets FCC StatementSelecting Channels Battery InstallationUsing AC Adapters Parent UnitOut of Range Indicator Testing the SystemLow Battery Indication First Time UseChanging the Volume To Listen to BabyChanging the Monitoring Time TroubleShooting ENCENDIDO/APAGADO Declaración de la Comisión Federal de Comunicaciones Selección de canales Instalación de las pilasUso de los adaptadores de Corriente alternada Unidad para padresIndicador de pilas descargadas Indicador de estar fuera de alcanceInstalación del monitor del bebé Para escuchar al bebé Cómo cambiar el volumenPrueba del sistema Cómo cambiar la hora de monitorizaciónSolución de desperfectos

A5220, 2794, A3930 specifications

The Graco A3930,2794,A5220 is a versatile and innovative paint sprayer that has gained popularity among DIY enthusiasts and professionals alike. This model combines advanced technology with user-friendly features, making it an ideal choice for various painting applications.

One of the standout features of the Graco A3930,2794,A5220 is its powerful motor that provides a high flow rate. This capability ensures efficient coverage, making it suitable for larger projects such as fences, decks, and interior walls. With a maximum output of up to 0.47 gallons per minute, users can complete tasks faster and with less effort.

The sprayer is equipped with a stainless steel piston pump that allows for a consistent spray pattern, reducing the likelihood of clogging during operation. This pump technology helps deliver a smooth and professional finish, even when using thicker coatings such as latex paint, stain, and sealers. In addition, the adjustable pressure control allows users to customize the spray to suit their specific project requirements, offering versatility in applications ranging from fine finishes to heavy coatings.

Another innovative feature of the Graco A3930,2794,A5220 is its RAC IV tip technology. This reversible tip design provides convenience, enabling users to easily unclog the tip without the need for disassembly. The technology also improves control over the spray pattern, permitting precise coverage in hard-to-reach areas.

Portability is another key aspect of this model. The lightweight design, combined with an integrated carrying handle, allows users to maneuver the equipment with ease. Additionally, the included suction set allows for the use of paint directly from the container, minimizing cleanup time and material waste.

The Graco A3930,2794,A5220 features a user-friendly setup process, making it accessible even for those new to paint spraying. The instruction manual is clear and comprehensive, ensuring that users can quickly learn how to operate and maintain the equipment.

Durability is yet another characteristic of the Graco A3930,2794,A5220. Constructed with high-quality materials, this sprayer is built to withstand the rigors of frequent use, making it a reliable addition to any toolkit.

Overall, the Graco A3930,2794,A5220 stands out as a powerful and flexible paint sprayer, ideal for both professionals and homeowners seeking efficiency and quality in their painting projects. With its advanced features and durable design, it is a valuable investment for anyone looking to achieve a flawless finish.