Rear Panel Controls | Mesa/Boogie M6 specs

EFFECTS LOOP:

SPEAKER OUTPUTS:

FUNCTION SWITCHES: (Continued)

REAR PANEL CONTROLS: (Continued)

The live performance power of the M6 CARBINE is greatly expanded by the inclusion of the Function Switch jacks as you gain access to alternate sounds without having to walk back to the amplifier or stop playing to adjust knobs.

NOTE: If the Front Panel VOICE select switch is set to any position other than 3/EXT SWITCH and you use a function switch jack to trigger another different VOICE mode, you will activate two VOICE modes at once. This will not hurt the amplifier and depend- ing on the combination, you may actually create a sound that is desirable. For example, you might like the mid scoop of position 2 blended with the mid bump of either position 4 or 5. Feel free to experiment as you might create a unique sound that is all yours. If you are in a VOICE mode and try to trigger that same mode with the Function Switches you will hear no change as the mode is already selected.

To trigger the Tuner MUTE feature: simply connect an unshielded ¼” cable to the MUTE Function Switch jack and ground the tip to the ring of the opposing end of the cable with either a master switcher or a latching type (not momentary) grounding footswitch.

NOTE: The Front Panel PULL MUTE feature overrides the Function Switch jack. Once MUTE is engaged on the Front Panel by pulling the MASTER control out, MUTE can not be defeated via the Rear Panel Switch jacks.

These are the Speaker Outputs for the M6 CARBINE. These jacks accept Nuetrik locking SPEAKON type connectors or standard ¼” phono type plugs. This is the suggested configuration. With an 8 ohm speaker load and the

impedance switch set to 8/4, your M6 CARBINE will produce approximately 300 watts of clean power.

A 4 ohm speaker load and the impedance switch set to 8/4, your M6 CARBINE will produce approxi-

mately 600 watts of clean power. Due to a limiter circuit added to protect the amplifier, a 2 ohm speaker

load with the impedance switch set to 2 OHM will still produce approximately 600 watts of clean power. When using a 2 ohm speaker load, make sure the SPEAKER IMPEDANCE switch is set to the 2 OHM

(switch down) setting. This is critical for reliability.

NOTE: Always match the SPEAKER IMPEDANCE switch setting to the speaker load in use. Playing at high volumes with a 2 ohm load connected while the SPEAKER IMPEDANCE switch is set to the 8/4 OHM setting will cause the short circuit protection circuit to trigger a mute at the SPEAKER OUTPUT. This will interrupt your performance and is necessary to prevent the mosfet power devices from getting too hot and being damaged.

TUNER: This Rear Panel auxiliary TUNER output provides for Rear Panel interfacing of rack mount tuners, where it is preferable to have all wiring stay in the rear of a rack system.

The M6 CARBINE incorporates an internal EFFECTS LOOP to handle the interfacing of outboard pro- cessing. This circuit is a patch point between the preamp and the power section and it is wired in series with the dry (un-affected)

signal. Since this loop is a series-type loop (as opposed to parallel) it is important that you use good quality proces-

sors “in the middle” of your amp. While the loop is compatible with most processor Input/Output impedance demands, there can be a lot of room for sonic compromise in some of the less expensive units. Remember that every part in your signal path is a tone part.

PAGE

M6 specifications

The Mesa/Boogie M6 is a versatile, high-performance guitar amplifier that has captivated musicians with its robust build and extensive feature set. Renowned for its superior sound quality and innovative technology, the M6 is designed to meet the demands of both studio recording and live performances, making it a favorite among guitarists across various genres.

At the core of the M6 is its unique Mesa/Boogie preamp and power amp configuration, which delivers exceptional tonal range and clarity. The amplifier features a 6L6 power tube configuration, known for its warm, punchy sound with dynamic response. This setup provides guitarists with the ability to easily shape their tone, thanks to a meticulously crafted four-channel design: Clean, Crunch, Extreme, and Solo. Each channel offers a distinct voice, allowing players to explore everything from pristine clean tones to aggressive high-gain sounds.

One of the standout features of the M6 is its powerful EQ section, consisting of a three-band equalizer with an additional presence control that fine-tunes the high frequencies. This robust EQ allows players to sculpt their sound to perfection, making it easy to adapt to various playing styles or musical environments. The inclusion of a global presence and reverb control further enhances the amp's versatility, enabling users to create ambient textures and rich soundscapes.

Incorporating advanced technologies, the M6 features Mesa’s proprietary "Spongy" and "Bold" power switching, enabling players to choose between different power levels, which can be ideal for those seeking a more compressed sound at lower volumes. This feature is particularly beneficial for home recording or smaller venues where excessive volume isn’t practical.

Additionally, the M6 is equipped with a series of unique tonal shaping tools, such as the intricate "Gain" and "Master" controls that provide a wide range of output levels without sacrificing tone quality. With an intuitive layout, musicians can seamlessly transition between different settings, allowing for easy experimentation in live situations.

Constructed with durability in mind, the M6 features heavy-duty components and a robust chassis, ensuring it can withstand the rigors of constant use. The stylish design, coupled with impressive sound fidelity, makes the Mesa/Boogie M6 a compelling choice for both aspiring and professional musicians alike, promising to deliver exceptional performance for years to come. Whether on stage or in the studio, the M6 undoubtedly stands out as a remarkable amplifier that caters to the varied needs of guitar players around the globe.