Wiring the Lock to Gate Opener Control Boards
FM700, PRO SW-1000, PRO-SW2000, PRO-SL1000, PRO-SL2000
Step 1. Turn control box power switch OFF and unplug the transformer or disconnect the solar panel. Remove control box cover and disconnect battery lead wires from the battery terminals before wiring the lock board to the opener control board.
Step 2. Connect the WHITE wire (included) to Terminal #1 on the lock board. Connect the RED battery lead wire (included) to Terminal #5 on the lock board.
Step 3. Attach the RED control board battery lead wire to one spade tongue on a double spade tongue connector (included). Attach the BLACK control board battery lead wire to one spade tongue on the other double spade tongue connector (included).
Step 4. Pull RED and BLACK wires from gate lock through the strain relief and into the control box. Attach BLACK wire to Terminal #3 on lock board. Attach RED wire to Terminal #4 on lock board (see Lock Board Wiring Chart below).
Step 5. Attach RED lock board battery lead wire to the double spade tongue terminal with the RED control board lead wire. Attach the BLACK lock board battery lead wire to the double spade tongue connector with the BLACK control board Lead Wire.
Step 6. Connect the WHITE wire from the lock board directly to the FIRST OPERATOR terminal block along with the power cable wire from the opener arm. Connect the WHITE wire to the BLACK terminal for a
Step 7. Reconnect opener to gate bracket. Connect the BLACK Battery lead wire (included) to Terminal #2 on the lock board. (See Lock Board Wiring Chart below). Connect RED wires (with double spade tongue terminal) to POSITIVE (+) battery terminal and the BLACK wires (with double spade tongue terminal) to the NEGATIVE
Lock Board
Wiring Chart
AdjTime
Lock Board 
1 2 
3 4 5
WHITE Wire to
BLACK on OperatorTerminal
BLACK Wire To Battery
Negative
*Place a dab of petroleum jelly on the terminal con- tacts to prevent corrosion.
RED Wire To Battery
Positive (+) Terminal
RED Wire From Lock
BLACK Wire From Lock
NOTE: It is recommended that the time adjustment knob is turned all the way to the right.
10