Cardinal Gates instruction sheet 2X O, Mount SS-30, Model EX-5, Assembly Instructions

MODEL EX-5

EXTENSION KIT TO ACCOMPANY MODEL SS-30

ASSEMBLY INSTRUCTIONS

K

L

M N O

ALL PARTS IN STEP ONE COME FROM MODEL SS-30 HARDWARE

S

OPTION

P Q R

T

1

6”

A(SS-30)

C (SS-30)

C (SS-30)

1.USING HARDWARE FROM THE SS-30 GATE, install hinge bracket (A) to wall using Phillips screw (C) beginning 6” above floor surface. Install second screw (C) in top of hinge bracket securing it to the wall.

(Use ruler on left edge of this sheet to measure from floor)

2 N 3 L

2X O

S

2.Insert eye bolts with standard nut and washer (N) into top and bottom of the first 21” BX2 extension.

3.Hang first BX2 extension by inserting hinge rod (L), through top of mounted hinge bracket (A), through upper plastic shoulder washer (O), through both eye bolts, through lower plastic shoulder washer (O), and finally through bottom of hinge bracket. To secure hinge, insert key ring (S) through hole in end of hinge rod.

4 M

3X

5

OPTION

T-BAR FLOOR MOUNT: To give added stability, secure gate to floor with either 2” screws (Q) through holes in bottom of T-Bar or attach enclosed Velcro strips

(R).

KP

2X

T	IMPORTANT: CARDINAL GATES RECOMMENDS USING
	ONE (1) T-BAR SUPPORT BRACKET FOR EVERY
	(2) TWO BX2 EXTENSIONS.

4.Connect BX2 extensions together by using three

(3) 1” hex head bolts and washer using hardware from BX2 (M) to join.

6Mount SS-30

6.Now move to SS-30 instruction sheet and mount the Stairway Special gate to hinge bracket (K) that was mounted in STEP FIVE.

5.Mount hinge bracket (K) to end of final BX2 extension using 1” hex head bolts, washer and lock nuts (P). Attach the T-Bar (T) support to the bottom of the BX2 extension when inserting lower hex bolt.

GATE IS RECOMMENDED FOR CHILDREN BETWEEEN 6 AND 24 MONTHS.