Apollo 1600, 1500 installation manual Symptom Gate will not open or close

Page 16

SYMPTOM Gate will not open or close.

Disconnect the solar panel or charger and measure the battery voltage. Battery should read 12 or more volts and never drop below 11 volts when gate is operating.

Reset program switches to factory setting. # 1,# 3,# 7,# 8 ON, all others OFF.

RED & WHITE PROGRAM

SWITCHES

1ON

2off

3ON

4off

5off

6off

7ON

8ON

9off

Disconnect all accessories from the circuit board - receivers, push buttons, keypads, loops, phones, intercoms, etc.

Activate the operator by momentarily shorting GND to INP on one of the three pin connectors.

If the operator works, reconnect each accessory individually starting with push button and test operation.

GND INP 12V

Momentarily short with a piece of wire or needle nose.

Disconnect actuator from circuit board and inspect pins in the connector for damage or poor connections.

Check for proper limit switch configuration (multimeter required) on the connector from the actuator:

GATE IN OPEN POSITION

Orange & Green wires are shorted, White & Green

wires

are open.

 

 

GATE IN CLOSED POSITION ..

White & Green wires are shorted, Orange & Green wires are open.

 

GATE IN MID TRAVEL

White, Green, & Orange wires are open, no shorts.

 

 

 

 

 

 

 

Replace circuit board.

 

 

16

Image 16
Contents Installation Manual Gate Operators, IncContents Important Safety Instructions Applications Charging Methods for Average Daily UsagePRE-INSTALLATION Checklist Consider safety and access options. Recommend if neededParts Identification Location of Pivot Point Operator InstallationVertical position of pivot arm Connecting the Actuator s Gate Bracket Installation Pin White Connector two on 636 Master & Slave 635/636 Control Board Connections635/636 Control Board Adjustments OFF Program SwitchesPush to Open Installation Rewiring actuator s for push to openTop View Vertical positionApollo Gate Operators Receiver Options Troubleshooting Operator & Accessories Symptom Gate opens OK but after closing, opens back upSymptom Gate moves only a few feet, then stops or reverses Symptom Gate surges too much. Does not run smoothSymptom Transmitter works, but not very far Symptom Gate randomly opens, closes, or stops for no reasonSymptom Gate will not open or close Limited TWO-YEAR Warranty

1600, 1500 specifications

The Apollo 1500 and 1600 series, developed by the esteemed Apollo Group, represents a significant leap in technology and performance in the realm of office machinery. These models, introduced in the late 20th century, have carved a niche for themselves with their robust features tailored to meet the evolving demands of modern workplaces.

One of the main features of the Apollo 1500 and 1600 series is their high-speed printing capabilities. With the ability to produce up to 60 pages per minute, these printers cater to high-volume environments, ensuring efficiency and productivity. This speed does not compromise quality, as both models deliver sharp, crisp text and vibrant images, making them suitable for various printing needs ranging from documents to marketing materials.

In terms of technology, the Apollo 1500 and 1600 series utilize advanced laser printing technology. This not only enhances print quality but also ensures longevity and reliability. The models feature improved toner systems, which provide a higher yield, reducing the frequency of cartridge changes and contributing to lower operational costs. Additionally, both printers incorporate an intuitive user interface, simplifying the printing process and reducing the learning curve for new users.

The versatility of the Apollo 1500 and 1600 series is evident in their compatibility with various media types and sizes, allowing for printing on envelopes, labels, and custom-size papers. This flexibility is crucial for businesses that require diverse printing solutions.

Another notable characteristic of these models is their connectivity options. They are equipped with integrated networking capabilities, including Ethernet and USB connections, enabling easy sharing among multiple users within an office environment. Furthermore, compatibility with mobile printing solutions allows users to print directly from their devices, accommodating the increasingly mobile workforce.

Energy efficiency is also a key feature of the Apollo 1500 and 1600 series. Designed with sustainability in mind, these printers adhere to energy-saving standards, reducing overall power consumption while still delivering high performance.

Overall, the Apollo 1500 and 1600 series stand as exemplary models in the industry, combining speed, quality, and advanced technology. Their design focuses on meeting the diverse needs of businesses, making them invaluable tools in any professional setting. These printers not only exemplify innovation but also herald a new era of office efficiency and productivity.