Connecting SUB-WOOFERS, Calibration | Citation ADP 303 specification

If you are using the side channel outputs of your Citation 7.0 controller, leave these channels connected directly to the side channel amplifier inputs. These channels will not be used for Dolby Digital playback of the ADP 303 digital processor. They will, however, still be used for all playback of 2 channel modes such as 6 AXIS, 70 MM, Dolby, and THX .

If your system side channel speaker locations are behind the primary listening position, you may elect to route the side channel outputs of the 7.0 processor through the ADP 303. In this scenario, the back outputs of the 7.0 processor will remain directly connected to your amplifier inputs and will not be used for Dolby Digital playback.

2. CONNECTING SUB-WOOFERS

If you are using sub-woofers, the ADP 303 may be configured for a mono sub-woofer only. You should configure the 7.0 A/V Controller to also use the mono sub-woofer output. If your system uses two Sub- woofers, connect a “Y” adapter to the sub out of the ADP 303 to drive left and right sub-woofer channels.

The ADP includes high pass filters which are engaged on the back of the unit. For most speaker configurations, switch this “speaker mode” setting to “small” on all channels. The “small” position should be used for all Citation speaker combinations.

Sub-woofer levels on the ADP 303 are adjusted by ear. Caution should be used when adjusting this control point. Too high of a bass level will cause your sub-woofers to “POP” or worse, damage your sub- woofers. Start the level in the full counter clockwise position and slowly raise it to the desired bass level.

3. CALIBRATION

The calibration of the ADP 303 is performed independently of the Citation 7.0 A/V Controller. After the

7.0is connected and calibrated, follow the instructions included with the ADP 303 for proper set up and calibration of the digital processor. The maximum output level should closely match the reference level of the 7.0 A/V Controller. We recommend the use of a SPL meter to accurately set up and match audio levels of the two units.

4. USING the ADP 303

For Dolby Digital Playback, the ADP 303 should be “ON” and the appropriate input selected on the ADP 303. Volume control is adjusted manually on the front panel of the ADP303.

When 6 AXIS or any other matrix surround mode is in use, the ADP 303 will be in a “By-pass” mode and the 7.0 will operate as if the ADP 303 was not in the circuit. “By Pass” is accessed on the ADP 303 by pressing the “By-pass” button located on the ADP 303 front panel. The ADP 303 will also be in the “By-Pass” mode when the “Power” to the unit is “OFF”. You will hear a popping sound when “By-pass” is engaged and disengaged. This is normal and does not reflect a problem with your unit or installation.

During Dolby Digital playback, the 7.0 should be selected to the appropriate input for video switching purposes and the volume level should be set all the way down. This is necessary if both side and back channels of the 7.0 are used in the system.

ADP 303 specifications

The Citation ADP 303 is a state-of-the-art aircraft that embodies modern advancements in aviation technology and design. Primarily recognized for its versatility and performance, it has captured the attention of both private and commercial aviation sectors.

One of the standout features of the Citation ADP 303 is its impressive cabin space. The interior is designed with passenger comfort in mind, offering a spacious environment optimized for both relaxation and productivity. With a capacity to accommodate up to eight passengers, the cabin is equipped with luxurious seating, advanced entertainment systems, and ample storage for luggage. The soundproofing technology ensures a quiet ride, making it ideal for both business and leisure travel.

In terms of performance, the Citation ADP 303 boasts an efficient and powerful propulsion system. It is powered by advanced turbofan engines that provide exceptional thrust while maintaining fuel efficiency. This not only reduces operational costs but also minimizes the aircraft's environmental impact. The aircraft can achieve impressive range capabilities, allowing for non-stop flights on longer routes, which is particularly advantageous for international travel.

The avionics suite of the Citation ADP 303 is another highlight, featuring cutting-edge technology that enhances safety and ease of operation. It is equipped with a glass cockpit, which includes digital displays that provide real-time data and situational awareness to pilots. This system supports advanced navigation and communication features, ensuring a seamless flying experience. The integration of automation technologies contributes to reducing pilot workload and increasing overall flight safety.

Another characteristic that sets the Citation ADP 303 apart is its ability to operate from shorter runways. This capability opens up a wider range of operational possibilities, enabling access to more airports and remote locations that larger aircraft may not reach. With its agile handling and responsive flight characteristics, the Citation ADP 303 provides a smooth and enjoyable flying experience.

In conclusion, the Citation ADP 303 is a well-rounded aircraft that stands out for its combination of luxury, performance, and advanced technology. Its spacious cabin, efficient engines, state-of-the-art avionics, and operational flexibility make it an excellent choice for those seeking a premium travel experience. Whether for business or recreation, the Citation ADP 303 delivers on the promise of modern aviation.