INSPECTION, MAINTENANCE, and Cleaning

WARNING! Make sure the Power Switch of the R/C Electric Racing Boat is in its “OFF” position and it is unplugged from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.

1.BEFORE EACH USE, inspect the general condition. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, damaged electri- cal wiring, and any other condition that may affect its safe operation. If abnormal noise or vibration occurs, have the problem corrected before further use. Do not use damaged equipment.

2.AFTER EACH USE, inspect the Racing Boat’s transmission shaft and bearing for water. Water may accumulate after each use, resulting in rust or blocked trans- mission shaft. Dry the transmission shaft by taking the propeller down, unscrew- ing and removing the shaft struts and drying the shaft and strut bearings. Adding lubricant to the shaft and bearings will also help prevent rust. Once done, reinstall all pieces.

Changing Boat Frequency

a. Turn off the boat and the remote control.

b. Open the tabs of the boat cover and unscrew the electric speed controller hous- ing.

c. Lightly hold down the circuit board and replace the crystal.

d. Screw down the electric speed controller housing and lock the top cover of the boat with the tabs.

e. Pull out and replace the crystal on the controller to match the crystal in the boat. The controller will only control the boat if it has the same frequency.

Troubleshooting

Problem	Possible Causes	Probable Solutions
R/C Electric Racing	1. Low Transmitter Batteries.	1. Change the old 8-AA Batteries in
Boat will not start		Transmitter (20) for new ones.
	2. Battery Pack (16) not connected to	2. Remove the Deck Cabin (1)
	the Electric Speed Controller (18).	and make sure the Battery Pack
		(16) is properly connected to the
		Electronic Speed Controller (18)
		Refer to Figure 2.

R/C Electric Racing	One, or possibly both of the Propellers	Turn off all power and check both
Boat will not steer	(4A and 4B) are damaged or possibly	Propellers (4A and 4B) for damage or
straight or follow	fouled with debris.	fouling and if necessary, replace one
turning commands		or both.
correctly
		REV 07f

SKU 95641

For technical questions, please call 1-800-444-3353.

Page 13

95641 specifications

Harbor Freight Tools 95641 is a powerful and versatile portable generator designed to meet the demands of various situations, from home backup power to outdoor activities. Known for its reliability and affordability, this generator has become a popular choice among DIY enthusiasts and professionals alike.

One of the main features of the Harbor Freight Tools 95641 is its robust engine, which delivers a peak power output of 3,500 watts and a continuous output of 3,000 watts. This makes it capable of powering essential appliances during an outage or supporting tools and equipment on job sites. The generator is equipped with a 4-stroke, air-cooled engine that ensures efficient fuel consumption and prolonged operation time without frequent refueling.

In terms of fuel capacity, the 95641 boasts a 1.6-gallon fuel tank, providing runtime of up to 9 hours at half load. This is particularly advantageous for users who require extended use in remote locations or during emergencies. The generator operates on gasoline, a common and easily sourced fuel type, adding to its convenience.

When it comes to starting the unit, users appreciate the effortless recoil start system, which provides reliable ignition even in cold weather conditions. For added versatility, the generator includes multiple outlets: two 120V AC outlets and one 12V DC outlet, allowing users to connect various devices and equipment simultaneously.

Durability is another strong point of the Harbor Freight Tools 95641. The generator is built with a sturdy frame that protects the engine and components from damage, making it suitable for rugged outdoor use as well as more delicate home applications. Additionally, the generator features a built-in low oil shutdown, a critical safety feature that automatically turns off the engine to prevent damage from running with insufficient oil.

The overall design of the 95641 incorporates user-friendly features, including a compact size and lightweight construction, making it easy to transport and store. It is an excellent choice for camping, tailgating, and emergency preparedness.

In summary, the Harbor Freight Tools 95641 is a reliable and efficient portable generator equipped with essential features and technologies that provide users with the power they need in various situations. Its combination of peak power output, fuel efficiency, multiple outlets, and durability makes it an ideal option for anyone in need of a dependable power solution.