7.To attach the toy bar, clip the hooks on both sides of the toy bar to the walker tray as shown in figure 8. Do not use the toy bar if it has been damaged or broken.
8.To fold the walker, turn the button to unlock and push it to release as shown in figure 9.
PLACING YOUR CHILD IN THE WALKER
1.Always check the walker prior to each use to ensure that the seat is snapped in place and that the walker has no loose or broken parts. Do Not use the walker if it is damaged or broken or missing parts.
2.Before placing your child in the walker, please determine that your child is developmentally ready for this type of product. Generally, your child must be able to sit upright unassisted and have adequate neck strength to exhibit very good control of his or her head. Typically, a child should be at least 6 months of age to use this product. Infants develop at different rates and you should discuss the use of a walker with your pediatrician to ensure that your infant is ready.
3.Adjust the seat height of the walker to the lowest setting. Place your child in the walker and check that both feet touch the floor. The child should have only part of their weight on their feet when their legs are straight. Adjust the walker height as needed as your child grows. Do not adjust height with child in the walker. Discontinue using the walker if your child attempts to climb out, reaches 30 pounds in weight or 32 inches in height, or when your child is able to walk unassisted.
4.The baby walker can be used for 3 different heights. To adjust height, remove baby from walker. Turn the safety button lengthwise and press the safety button until the mechanism is released. Adjust to desired height as shown in figure 10.
WARNING: TO REDUCE CHANCE OF CHILD SLIPPING OUT OF THE SEAT, CHECK THAT BOTH FEET OF THE CHILD TOUCH
THE FLOOR.
5.When the position has been selected, check that the safety button turned through 90 degrees to prevent the accidental release of the mechanism as shown in figure 11. Always follow this procedure. Never use the baby walker if the button is not in the sideways position. Important: Never change the height when the baby is in the walker.
Fig. 8 | |
|
Fig. 9
Fig. 10
Fig. 11
COMPLETED WALKER
IF YOU EXPERIENCE ANY DIFFICULTY IN USING THIS PRODUCT PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT AT (800)
AND 4:30PM PACIFIC STANDARD TIME OR VISIT OUR WEBSITE AT3 WWW. BABYTREND.COM FOR ASSISTANCE.