Elmo p10 instruction manual Rear Panel

ENGLISH

■Rear Panel

PART NAMES

AND

FUNCTIONS

			y			ui
		r t
	e
	w
	q
				Image whose display
Name	Function					is selectable with
					image select button
q DVI OUT	To output digital video signal to the projector, the					Camera image
(DVI Output Terminal) PC monitor or other DVI input device		P.75				SD mode
w RGB OUT	To output analog video signal to the projector, the					Camera image
(Analog RGB	PC monitor or other RGB input device	P.75				[RGB IN] image
Output Terminal)						SD mode
e RGB IN	Input image is output from the analog RGB output
(Analog RGB	terminal when RGB IN ( ) is selected with image
Input Terminal)	select button.	P.76
r VIDEO OUT	To output image from the RCA pin-jack terminal to					Camera image
(Composite Video the NTSC/PAL-system monitor (e.g., TV monitor)						SD mode
Output Terminal)		P.76
t S-VIDEO OUT	To output image from the Mini DIN 4P terminal to
(S-video Output	the NTSC/PAL-system monitor (e.g., TV monitor)
Terminal)		P.76
y RS-232C	To control the main unit from a PC through the
(RS-232C Terminal) RS-232C cable		P.96
u 12VDC IN	Socket for the AC adapter
(Power Socket)
i (DIP Switch)	To switch the following:

[A]key: Image output system

[B]key: Image output screen size

			0
					[A] key	[B] key
		1
				0	NTSC	Over-scan
				1	PAL	Under-scan
	A B
					When switching the DIP switch key settings, be sure
Display of Rear Panel
					to turn OFF the power supply to the main unit.

65