To Attach the Decal
Place decal on front of the base as shown. Rub over decal with hand or clean cloth to assure adhesion.
To Use Parking Stands
To install parking stands (two in the front, one in the back), lift base slightly, depress button on front of stands and push stands up until they snap into place.
To use parking stands, lift base 
slightly and push stands down 
until they snap into place. 
To release parking stands, lift base slightly and depress button on front of stands. Push stands upward into storage position.
!When parking stands are in use, it is still possible
!for your child to move the activity center.
!Be sure to engage both parking stands.
!Never place the activity center on a table or
!countertop.
Friction Strip Feature
Avoid serious injury or death. DO NOT use product without the five friction strips under the base.
! Make sure strips are ! kept clean.
! Clean strips with
! WATER ONLY.
Friction strips under base
To Adjust the Activity Center
Remove your child from the activity center before making any adjustments.
To raise or lower your activity center:
Push up button at front of tray as shown and hold it.
Push down or pull up while adjusting to desired height.
Tray should lower easily.
DO NOT force tray down
or unit could be damaged.
To Attach the Spoiler
Line up the pegs on the bottom of the spoiler with the two holes at the back of the activity center and push the spoiler in until it snaps in place. It will not be removable.
Do not allow spoiler to block seat by inserting it backwards.
Avoid falls and other hazards. Never allow unit to be pushed while child is in product.
7 | 8 |