Magnavox 39ME412V, 26ME402V owner manual Use your TV, Switching channels, Adjusting volume

4 Use your TV

13

Switching channels

English

Switching on your TV and putting it in standby mode

To Turn Power On or to Turn Standby On

•Touch or press . on the front panel or the remote control. Note

••Energy consumption contributes to air and water pollution.When the AC power cord is plugged in, your TV consumes energy.Your TV has very low standby power consumption.

Adjusting volume

••The above image is an example for 32 inch and larger screen size TVs. It may differ depending on what product you purchased.

To increase or decrease volume

• Touch VOL ◄(down) / ►(up) on the front panel or press VOL + / − on the remote control.

To mute or unmute sound

•Press on the remote control to mute the sound.

•Press again or VOL + / − to recover the original sound.

••The above image is an example for 32 inch and larger screen size TVs. It may differ depending on what product you purchased.

To select Channels by using CH ▲/▼ or CH + / −

•Touch CH ▲(up) / ▼(down) on the front panel or press CH + / − on the remote control.

To select Channels by using the NUMBER buttons

Digital TV operation

•For Digital channels, press a number followed by a dot “•” and the corresponding sub channel number.

––When selecting Digital channel 11.1

Be sure to press • before entering the subchannel number.

Analog/Cable TV operation

–– When selecting cable or Analog channel 11

Press PREV.CH to return to the previously viewed channel.

Note

••To select the non-memorized channels, use the NUMBER buttons.

••No Signal will appear on the TV screen after the subchannel broadcast is over.

••Audio only program message will appear on the TV screen, when you receive only sound signal.