Loewe XELOS A 42 Calling additional functions, Call timer overview, Select picture format

Operating modes – TV

Calling additional functions

Select additional functions such as Image+✳, Teletext subtitles, Personal teletext pages, Headphone volume, Scan stations and to move the picture up and down.

Additional functions			INFO END
Teletext subtitles	OK	Personal teletext pages	Headphone volume

Call timer overview

If timer recordings have been programmed, you will see when which station is recorded here.

Timer list	Fri 12.09./14:12
12.09. 18:00-18:30 3SAT	Die Köchin, die Putzfrau und d

TEXT Detail	New recording	Change	END
		Delete	INFO

Select picture format

The TV set sets the best picture format automatically when Auto format is switched on. If you want to set a different format, press this button until the desired format is selected or select the

format with		.
	Picture format
	16:9		4:3 Panorama Cinema Zoom

In sets with an LCD screen, you can switch the panorama picture over to distorti- on-free representation. Dark margins are then visible on the left and right of the picture.

Switching over: Keep the M button on the set pressed, at the same time press the ”Picture format” button on the remote control briefly.

Resetting: Press the same button combination again.

Move picture up/down
To make picture subtitles visible, you can use	to move

the picture up or down with the picture formats “Panorama“, “Cinema“ and “Zoom“.

Note: for DVB-T stations in UK you can switch back and forth quickly between two stations using this button

TV menu

Call up the TV menu

TV menu			INFO END
Picture	Sound Recording	Connections	Settings
Picture adjustment	...

You will find a description of the picture and sound settings on page 19. The TV menu offers other options for recording, connections and settings of the TV set.

For a recorder that is logged in, you can find the following menus in the “Recording“:

Recording wizard - to programme new timer recordings

• Via EPG • Via teletext (VPT) • Manually

You will find further information about timer recording on page 33.

Timer list

Here you will find a list of programmes programmed for recording. You can change the recording data or delete programmed recordings and programme new recordings.

Pre-record time and Post record time

For recordings without VPS/PDC, set a lead and lag time here so that the pro- gramme is fully recorded despite any slight differences in the time.

Under “Connections“ you will find the following functions: New devices/modifications (connection wizard)

The connection wizard helps you connect and log in additional equipment such as video recorders, DVD players/recorders, camcorders/digital cameras, pay TV decoders, equipment with component signals and digital HDMI/DVI signals.

Antenna DVB

• Antenna DVB-T • Antenna DVB-S✳

You can find more information on pages 13 and 14.

Digital Link Plus

Transmission of the station data from the TV set to the video/DVD recorder if a recorder with Digital Link Plus is connected.

Miscellaneous (connections)

•Set AV norm for the connections manually (if it is not recognised automatical- ly).

•“Assign audio digital signals“ to one of the AV sockets.

•“Allow switching voltage“ to display the signals of the connected device imme- diately on the screen via Euro AV during playback.

•RGB insertions at AV2 to play back RGB signals at all station storage locations.

•Select decoder stations and set sound encoding.

Under “Settings“ you will find the following functions:

Stations

Here you can search for and store new stations automatically or manually. With “Change stations“, you can rearrange and delete the stations and change station names (not for DVB-T stations in UK).

• Search wizard • Manual adjustment • Change stations

Downloaded From TV-Manual.com Manuals

BA32789_021XelosModusRel_5_GB.in21 21

21 -

15.01.2007 16:55:28