Intel SRCSAS18E manual When Using Your Computer System

Page 6

When Using Your Computer System

As you use your computer system, observe the following safety guidelines:

Caution: Do not operate your computer system with any cover(s) (such as computer covers, bezels, filler brackets, and front-panel inserts) removed:

•To help avoid damaging your computer, be sure the voltage selection switch on the power supply is set to match the alternating current (AC) power available at your location:

—115 volts (V)/60 hertz (Hz) in most of North and South America and some Far Eastern countries such as Japan, South Korea, and Taiwan

—230 V/50 Hz in most of Europe, the Middle East, and the Far East. Also be sure your monitor and attached peripherals are electrically rated to operate with the AC power available in your location.

•To help avoid possible damage to the server board, wait five seconds after turning off the system before removing a component from the server board or disconnecting a peripheral device from the computer.

•To help prevent electric shock, plug the computer and peripheral power cables into properly grounded power sources. These cables are equipped with 3-prong plugs to ensure proper grounding. Do not use adapter plugs or remove the grounding prong from a cable. If you must use an extension cable, use a 3-wire cable with properly grounded plugs.

•To help protect your computer system from sudden, transient increases and decreases in electrical power, use a surge suppressor, line conditioner, or uninterruptible power supply.

•Be sure nothing rests on your computer system’s cables and that the cables are not located where they can be stepped on or tripped over.

•Do not spill food or liquids on your computer. If the computer gets wet, consult the documentation that came with it.

•Do not push any objects into the openings of your computer. Doing so can cause fire or electric shock by shorting out interior components.

•Keep your computer away from radiators and heat sources. Also, do not block cooling vents. Avoid placing loose papers underneath your computer; do not place your computer in a closed-in wall unit or on a rug.

When Working Inside Your Computer

Note: Do not attempt to service the computer system yourself, except as explained in this guide and elsewhere in Intel documentation. Always follow installation and service instructions closely.

1.Turn off your computer and any peripherals.

2.Disconnect your computer and peripherals from their power sources. Also disconnect any telephone or telecommunications lines from the computer.

Doing so reduces the potential for personal injury or shock.

vi

Intel® RAID Controller SRCSAS18E User’s Guidel

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Intel RAID Controller SRCSAS18E User’s Guide Intel Order Number D26788-003Intel RAID Controller SRCSAS18E User’s Guidel Safety Warnings and Instructions Warnung Deutsch Wichtige Sicherheitshinweise Avertissement Français Consignes de sécurité When Using Your Computer System Protecting Against Electrostatic Discharge Regulatory and Certification Information Regulatory Compliance Country Marking Regulatory Compliance Country Marking Electromagnetic Compatibility Notices Europe CE Declaration of Conformity Audience OrganizationRelated Publication Xiv Contents Xvi Figures Xviii Tables Intel RAID Controller SRCSAS18E OverviewOverview Configuration Scenarios SAS Controller DescriptionBenefits of SAS Example Direct-Connect ApplicationSummary of SAS RAID Controller Features PCI Express* ArchitectureOperating System Support SAS Features Sata FeaturesPCI Performance Usability FlexibilityDrive Roaming Drive Migration NvramHardware Specifications Intel RAID Controller SRCSAS18E OverviewIntel RAID Controller SRCSAS18E Hardware Installation RequirementsQuick Installation Detailed InstallationPCI Express Slot SAS Device Cables Serial ATA Connectors SAS and Sata Plugs and SAS Backplane Receptacle Connector Intel RAID Controller SRCSAS18E to a Hard Disk Drive RAID Controller SRCSAS18E to an Expander Board Intel RAID Controller SRCSAS18E User’s Guide After Installing the Storage Adapter Intel RAID Controller SRCSAS18E Characteristics Jumper Description Type CommentsCharacteristics Card CharacteristicsTechnical Specifications SpecificationsArray Performance Features Fault ToleranceElectrical Characteristics Thermal and Atmospheric CharacteristicsSafety Characteristics Bios Glossary of Terms and AbbreviationsSAS

SRCSAS18E specifications

The Intel SRCSAS18E is a robust and high-performance storage controller card designed for data-intensive applications, primarily targeted at enterprise environments. Featuring support for both Serial Attached SCSI (SAS) and SATA drives, this controller brings an impressive array of features, technologies, and characteristics that enhance storage performance, reliability, and scalability.

One of the standout features of the SRCSAS18E is its capability to manage up to 18 drives simultaneously. This is achieved through the use of eight internal ports, which can connect to a wide range of SAS and SATA drives, enabling organizations to build a scalable storage architecture. The controller supports RAID levels 0, 1, 5, 6, 10, 50, and 60, providing flexibility in data management and protection strategies. This RAID functionality ensures that data can be mirrored, striped, or spread across multiple drives to enhance performance and redundancy, which is crucial for minimizing downtime.

The SRCSAS18E incorporates advanced technologies such as Intel's RAID Response Technology, which allows for enhanced data protection and recovery options. This technology facilitates faster rebuilding of arrays in the event of a drive failure, significantly reducing the risk of data loss. Additionally, the controller includes battery-backed cache memory, which helps to ensure data integrity and performance by providing temporary storage during write operations, even in case of power loss.

For seamless integration with current infrastructure, the SRCSAS18E supports PCI Express interface. It offers up to 6 Gb/s data transfer rates per port, optimizing data throughput and overall system performance. This high-speed connectivity is essential for applications that require rapid access to vast amounts of data, including virtualization and high-performance computing tasks.

The controller also features compatibility with various operating systems and server platforms, enhancing its versatility. Organizations can take advantage of plug-and-play functionality, allowing for easier deployment and management in diverse IT environments.

Furthermore, the SRCSAS18E is built with enterprise-grade reliability in mind, supporting features like thermal monitoring and advanced error correction to safeguard against hardware failures. Its ability to manage a large number of drives effectively makes it an ideal solution for data centers and enterprises looking to enhance their storage solutions while ensuring maximum uptime and data availability.

In summary, the Intel SRCSAS18E is a feature-rich storage controller well-suited for demanding environments that require reliable and efficient data management. Its combination of high performance, support for multiple RAID configurations, and robust data protection technologies makes it a valuable addition to any enterprise storage infrastructure.
Top Page Image Contents