Harbor Freight Tools 90139 manual Figure E

2.Smooth the edges of the punched out pieces with sand paper. Begin putting together by using the drawing below as a guide. Use glue on the portions shown in “black”. See arrows in Figure D.

3.Use Scotch Tape® on the backside to hold round or non-flat pieces together.

4.A rubber band can be used to hold assembled pieces until glue has dried. Clean the edges or surfaces of the Riverboat with a wet cloth to remove wet glue or unsightly smudges.

5.Rod “A” passes through Paddle Wheels and frame, left to right of the Riverboat.

6.When assembly is completed, you can finish the Riverboat with paint, colored markers or crayons using your creativity.

#12

Assemble #’s 26, 30, 31- 35 into #12

#29

#30

#26 #34 X 2

#27

#7

#9

#4

▼

#6

#32 X 2

#34 X 2

Put the rod through 19 and 20 assembly and them put 23, 25 into 18.

#22 X 2

#2

#38 X 2

#10 #11 X 6

#3

#1

Tape the underside of the round to hold together.

	▼
	#18 X 2
▼	#24 X 2 X 2

“A”

Brass Rod#25 X 2

#23 X 8 X 2

#19 X 2

#5

#37 X 2

#36

#39 X 2 #36

▼

#40 X 2

#17 X 2

#16 X 2

#21 X 2	Assemble
	Rod “A” through
	#’s 21, 19, 23-25, 18,
	17, 16, 13, left and
	right.

SKU 90139

Figure E

Figure D

PAGE 4

#13